akatrevorjay / intel-joule-bios-flash-linuxLinks
Flashing the BIOS on an Intel Joule 570x from Linux
☆23Updated 6 months ago
Alternatives and similar repositories for intel-joule-bios-flash-linux
Users that are interested in intel-joule-bios-flash-linux are comparing it to the libraries listed below
Sorting:
- This is the official distribution of the Intel(R) Reference Operating System for the Internet of Things, or Intel(R) REF-OS-IOT for short…☆23Updated 3 years ago
- DISCONTINUATION OF PROJECT. This project will no longer be maintained by Intel. Intel will not provide or guarantee development of or s…☆37Updated 3 years ago
- Bootloader for the EFM32HG Tomu Board☆74Updated 4 years ago
- Mali-400 kernel drivers for external compilation for use with linux-sunxi kernel.☆24Updated 12 years ago
- Network tools for testing with Qemu☆40Updated last month
- JTAG reverse engineering software for FTDI compatible cables☆53Updated 10 years ago
- Slides and documentation from talks/demos/meetups☆49Updated 5 years ago
- QSPI flash multiplexer - connect a SPI NOR flash to either an embedded system or a programmer for remote firmware tests☆52Updated 4 years ago
- Apio examples☆37Updated this week
- BabbleSim base/common components. Any BabbleSim user will want some of these.☆17Updated last month
- An open source Arduino library for DSLogic wireless module☆27Updated 11 years ago
- Free Libre Open-Source/-Hardware JTAG/UART adapter based on FTDI2232H☆31Updated 8 years ago
- Work with micro-controller special function register in gdb.☆17Updated 8 years ago
- Verilog for the Bus Pirate Ultra FPGA☆26Updated 5 years ago
- Debugger For Cortex-M MCUs (Linux & OSX)☆26Updated 3 years ago
- advanced u-boot (for sunxi Orange Pi Zero | Zero Plus2 h3 | R1, and another sunxi boards ), ready for full load linux from spi-flash, i2c…☆36Updated 6 years ago
- A version of the HDMI2USB firmware based around LiteX tools produced by @Enjoy-Digital (based on misoc+migen created by @M-Labs)☆149Updated 5 years ago
- BSP layer for Yocto/OpenEmbedded providing MIPS based machine targets☆14Updated 7 years ago
- An attempt at an open source toolchain for the Hexagon DSP☆38Updated 7 years ago
- Unofficial mirror of GNUK's submodule: Chopstx☆15Updated 3 years ago
- OpenPOWER / Open Compute Server, based upon POWER9☆31Updated 7 years ago
- A 300 MHz to 3800 MHz RF module for the Novena Open Hardware Computing Platform☆53Updated 9 years ago
- Manifests to create an Arch Linux ARM rootfs augmented with Nouveau and the OSS graphics stack for NVIDIA's Jetson TK1/TX1 boards☆60Updated 8 years ago
- Software, tools, documentation for Vegaboard platform☆65Updated 5 years ago
- SiFive OpenEmbedded / Yocto BSP Layer☆54Updated last week
- Remote control boards in a LAVA setup.☆21Updated 7 years ago
- The nrfjprog command line tool implemented in Python.☆33Updated 3 years ago
- CANoolder: CAN to 3.3V logic level interface. Dumb. Cheap. Simple. Pick 3.☆13Updated 7 years ago
- Qt-based software for USB2Sniffer☆33Updated 2 weeks ago
- Patches include sunxi platform support and various driver fixes☆43Updated 6 months ago