ZakSN / sd_muxLinks
micro SD card multiplexer
☆19Updated 8 years ago
Alternatives and similar repositories for sd_mux
Users that are interested in sd_mux are comparing it to the libraries listed below
Sorting:
- Simple example for running code on VPU from Linux☆20Updated last year
- Utilities to flash Fomu from a Raspberry Pi☆23Updated 4 years ago
- 1kB TFTP Ethernet bootloader for ATmega328P and ENC28J60☆55Updated 8 years ago
- Chip support package for Cypress EZ-USB FX2 series microcontrollers☆84Updated last month
- NuttX port to Fernvale platform☆27Updated 9 years ago
- Icestorm, Arachne-pnr and Yosys pre-built binaries: GNU/Linux(+ARM), Windows and Mac OS☆38Updated 3 years ago
- GCC and Binutils port for the TI PRU I/O processor☆98Updated 2 weeks ago
- ice40 USB Analyzer☆57Updated 5 years ago
- C++ TCP/IP and SSH stack with bounded run time and no dynamic memory allocations☆41Updated 6 months ago
- The Accelerated Linux build system☆49Updated last year
- Test of ICEstick PLL usage with Yosys/Arachne-PNR/Icetools☆21Updated 9 years ago
- Raspberry PI bare metal☆48Updated 12 years ago
- Example projects for the 1BitSy development boards.☆37Updated 2 years ago
- A small 6502 system with MS BASIC in ROM☆54Updated 6 years ago
- Flashing Pano Logic thin clients without a programmer☆42Updated 3 years ago
- Bootloader for the EFM32HG Tomu Board☆75Updated 4 years ago
- Experiments getting a Cypress FX3 SuperSpeed USB3 dev kit to behave as a logic analyzer.☆29Updated 8 years ago
- J-core SOC for ice40 FPGA☆20Updated 6 years ago
- Low-area DVI experiment for iCE40 UP5k and HX1k FPGAs☆33Updated 4 years ago
- Raspberry Pi Pico Transputer Emulator☆50Updated 2 years ago
- PanoLogic Zero Client G1 reverse engineering info☆75Updated last year
- Minimalist ARM Cortex Microcontroller development, in assembler.☆24Updated 7 years ago
- QEMU MSP430 Target (Fork of QEMU)☆14Updated 9 years ago
- USB Full-Speed core written in migen/LiteX☆43Updated 6 years ago
- The RECON project creates library for Nios II Microcontroller System and Tool chain. The library includes a collection of hardware config…☆21Updated 7 years ago
- Tutorial/starter code for setting up GCC for PSOC5 (ARM) in an open-source baremetal configuration.☆33Updated 11 years ago
- Programs for the FOMU, DE10NANO and ULX3S FPGA boards, written in Silice https://github.com/sylefeb/Silice☆36Updated 2 years ago
- An implementation of the SWD protocol using the Bus Pirate☆90Updated 8 years ago
- Bootloader for Fomu☆105Updated 3 years ago
- Boot any x86-based computer from a classic parallel port.☆34Updated 6 years ago