Alternatives and similar repositories for WeActStudio.MiniSTM32F4x1

Users that are interested in WeActStudio.MiniSTM32F4x1 are comparing it to the libraries listed below

• Serasidis / STM32_HID_Bootloader
  Driverless USB HID bootloader and flashing tool for STM32F10X devices
  ☆476Updated last year
• NilujePerchut / kicad_scripts
  Some kicad scripts
  ☆573Updated last year
• WeActStudio / MiniSTM32H7xx
  STM32H750VBT6/STM32H743VIT6 Core Board With 0.96'' TFT,TF Card,8MB QSPI FLASH,8MB SPI FLASH,DVP Port
  ☆377Updated 8 months ago
• WeActStudio / BluePill-Plus
  STM32F103C8T6/GD32F303CCT6 Core Board Doc
  ☆158Updated last month
• rogerclarkmelbourne / STM32duino-bootloader
  Bootloader for STM32F103 boards, for use with the Arduino_STM32 repo and the Arduino IDE
  ☆1,035Updated last year
• arpruss / USBComposite_stm32f1
  USB Composite library for STM32F1 (HID, Serial, MIDI and XBox360 controller)
  ☆405Updated last year
• devanlai / dapboot
  DFU Bootloader for STM32 chips
  ☆359Updated 7 months ago
• ussserrr / stm32pio
  Automate managing of STM32CubeMX + PlatformIO projects
  ☆243Updated 2 years ago
• afiskon / stm32-ssd1306
  STM32 library for working with OLEDs based on SSD1306, SH1106, SH1107 and SSD1309, supports I2C and SPI
  ☆935Updated 3 months ago
• pointhi / kicad-color-schemes
  Want to change the color scheme of KiCad? Look here for Inspiration.
  ☆677Updated last year
• sparkfun / SparkFun-KiCad-Libraries
  SparkFun's KiCad Libraries
  ☆621Updated this week
• r2axz / bluepill-serial-monster
  USB to 3 Port Serial (UART) adapter firmware for STM32 Blue Pill.
  ☆357Updated 2 years ago
• thesourcerer8 / altium2kicad
  Altium to KiCad converter for PCB and schematics
  ☆914Updated 2 years ago
• RobertoBenjami / stm32_graphics_display_drivers
  STM32 LCD drivers (currently: spi(dma), gpio, fsmc(dma), st7735, st7783, ili9325, ili9328, ili9341, ili9486, ili9488, hx8347g)
  ☆648Updated 2 years ago
• 4ilo / ssd1306-stm32HAL
  ssd1306 library for stm32 using hal library
  ☆249Updated 2 years ago
• Krakenw / Stlink-Bootloaders
  Stlink Bootloaders
  ☆304Updated 5 years ago
• platformio / platform-ststm32
  ST STM32: development platform for PlatformIO
  ☆438Updated last month
• adafruit / tinyuf2
  UF2 bootloader based on TinyUSB for embedded devices such as ESP32S2, STM32F4 and iMX RT10xx
  ☆415Updated 3 weeks ago
• dmitrystu / libusb_stm32
  Lightweight USB device Stack for STM32 microcontrollers
  ☆771Updated last year
• thanks4opensource / buck50
  STM32F103 logic analyzer and more
  ☆611Updated 4 years ago
• martnak / STM32-ILI9341
  Simple HAL driver for ILI9341 320x240 TFT LCD with Touchscreen for STM32 microcontrollers
  ☆233Updated 5 years ago
• easyw / RF-tools-KiCAD
  KiCAD RF tools: footprints wizard and round tracks, mask expander, via fencing
  ☆760Updated 10 months ago
• espressif / kicad-libraries
  KiCad libraries for Espressif SoCs, modules, and DevKits.
  ☆995Updated 7 months ago
• openwch / ch32v003
  CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10
  ☆503Updated this week
• TousstNicolas / JLC2KiCad_lib
  JLC2KICAD_lib is a python script that generate a component library (schematic, footprint and 3D model ) for KiCad from the JLCPCB/easyEDA…
  ☆301Updated 7 months ago
• pico-coder / sigrok-pico
  Use a raspberry pi pico (rp2040) as a logic analyzer and oscilloscope with sigrok
  ☆939Updated 6 months ago
• wokwi / easyeda2kicad
  Convert EasyEDA designs to KiCad EDA
  ☆309Updated last year
• IOsetting / py32f0-template
  Puya PY32F002A PY32F003 PY32F030 GNU GCC SDK, template and examples
  ☆246Updated this week
• ryan-ma / PD_Micro
  USB-C PD3.0 PPS on ATMega32U4 Arduino board
  ☆419Updated 4 years ago
• STM32-base / STM32-base
  A simple start for any STM32 based project.
  ☆383Updated last year