TinajaLabs / ansible-role-ntp-gps
Ansible Role: NTP with GPS on Raspberry Pi
☆16Updated 2 years ago
Alternatives and similar repositories for ansible-role-ntp-gps:
Users that are interested in ansible-role-ntp-gps are comparing it to the libraries listed below
- Yet another DCF77 decoder. This one is intended for the Raspberry Pi platform but might work on other devices using GPIO pins too.☆19Updated last year
- Control and power up to 20 W of neopixels or other WS2812b LEDs over ethernet!☆22Updated 5 years ago
- ☆36Updated 4 years ago
- Demo projects for the wESP32 board in different development environments☆22Updated 8 months ago
- ☆28Updated 9 years ago
- DMA-based NeoPixel library for SAMD microcontrollers (Feather M0, M4, Arduino Zero, etc.)☆39Updated 11 months ago
- print out the low-level configuration registers for the Arduino Zero (and similar boards)☆24Updated 4 years ago
- An ESP8266 based clock intended for the bedroom. It uses neopixels to light one of 12 segments giving the hour and approximate minutes, …☆19Updated 7 years ago
- Small Lora(WAN) board using an Atmega1284P chip and RFM95 module☆19Updated last year
- ☆21Updated 4 months ago
- Hardware of Jasper's Electronic Load R2☆21Updated 6 years ago
- ATTiny45/85 firmware for BlinkStick device☆72Updated 7 years ago
- W.O.P.R. Missile Code Display☆49Updated 8 months ago
- Breakout board for LoRa all-in-one module CMWX1ZZABZ☆12Updated 4 years ago
- PCB files for Adafruit OLED FeatherWing☆13Updated 4 years ago
- Reciever software for FM modulated temperature stations.☆18Updated 2 years ago
- Some tips and tricks for CircuitPython, using a QT Py board☆42Updated 2 years ago
- Seeed OLED Display 96*96 library☆12Updated 2 months ago
- RF (433Mhz) to MQTT Bridge - with hardware☆39Updated 7 years ago
- Originally intended to be a controller for a RetroPie. A soft power controller that allows for Raspberry Pi proper shutdown. Intention is…☆22Updated 7 years ago
- a DIY flat christmas decoration with a ATtiny25, 20 led´s and a coin cell battery☆25Updated 4 years ago
- Home logging station☆12Updated 3 years ago
- Open Hardware Summit 2018 Badge☆20Updated 6 years ago
- USB Power monitor☆44Updated 6 years ago
- A microcontroller board that can accommodate a range of different colour TFT displays.☆18Updated 2 years ago
- A simple continuity tester, based on an ATtiny85 and a piezo buzzer.☆18Updated 7 years ago
- ☆24Updated 9 years ago
- A library to control HopeRF RFM69-series radio modules through SPI and GPIO☆18Updated 6 years ago
- ☆15Updated last year
- Open Source Open Hardware USB Power Supply Active Load testing unit☆11Updated 7 years ago