Alternatives and similar repositories for SmartSupplyMini

Users that are interested in SmartSupplyMini are comparing it to the libraries listed below

• jrsikken / ElectronicLoadR2
  Hardware of Jasper's Electronic Load R2
  ☆22Updated 7 years ago
• bertrik / ElectronicLoad
  Arduino software for an electronically controlled load, based on a STM32 microcontroller
  ☆21Updated 4 years ago
• paltatech / half-bridge
  TO247 half bridge module for EVs
  ☆16Updated 7 years ago
• MartinStokroos / openMicroInverter
  An open hardware platform for experimenting with DC-to-AC conversion, power and energy metering and grid tie inverters.
  ☆72Updated last year
• upiir / 1602_oled_character_display
  Simple design for 16x2 OLED Character Display using the US2066 chip
  ☆13Updated 2 years ago
• techie66 / CANSerial
  Serial port emulation over CAN bus
  ☆30Updated 3 years ago
• kaktus85 / MightyWattR3
  Resources for MightyWatt R3 electronic load
  ☆31Updated 3 months ago
• mrkindustries / openPSU
  An open source linear power supply unit for hobbyists and professionals
  ☆37Updated 4 years ago
• dilshan / 12v-automatic-ups
  12V Automatic UPS system
  ☆45Updated 4 years ago
• kf4mot / 10mhz_distributor
  10 MHz 3 channel distribution amplifier and low pass filter designed to integrate in a BG7TBL GPSDO
  ☆11Updated 4 years ago
• OLIMEX / LoRa-STM32WL-DevKIT
  STM32WL SOC LoRa / LoRaWAN development board with JTAG debugger and sensors for light, temperature, humidity, pressure, 3-axis digital ma…
  ☆15Updated 3 months ago
• sparkfun / Qwiic_OpenLog
  Open source I2C based datalogger. The bigger, better cousin to the original serial OpenLog.
  ☆24Updated 2 years ago
• HydroPWNics / SunLeaf
  SunLeaf is a WiFi based remote sensor module, interfaces with I2C and UART sensors, pushes directly to the cloud.
  ☆22Updated 9 years ago
• swharden / USB-Counter
  Open-source USB frequency counter
  ☆25Updated 2 years ago
• Jana-Marie / temperature-logger
  Anotter USB temperature logger that can record up to four channels with thermocouple or NTCs connected via CDC directly or SCPI to USB.
  ☆64Updated 2 years ago
• joeltroughton / nanoAmmeter
  A small ammeter for measuring printed glucose biosensors
  ☆27Updated 4 years ago
• JAndrassy / my_boards
  My Arduino boards custom variants. You can use it as starting point for your boards specialities.
  ☆18Updated 2 years ago
• OLIMEX / eduArdu
  Open Source Hardware Educational board based on Arduino Leonardo
  ☆23Updated 5 years ago
• elmot / open-oscilloscope-stm32f3
  Open-Source Oscilloscope based on STM32F3-DISCOVERY board
  ☆38Updated 4 years ago
• MisterHW / EVAL-MP8862
  A self-contained MP8862 1..20.5V/2A buck-boost DCDC module for breadboard, evaluation and deployment
  ☆14Updated 3 years ago
• owntech-foundation / TWIST
  Repository holding all KiCad files for the OwnTech's TWIST reprogrammable 300W power converter
  ☆12Updated last month
• larsks / arduino-gpib
  ☆17Updated 9 years ago
• reivax-boucoi / Electronic_Load
  DIY Electronic load for DCDC converter characterization
  ☆51Updated 5 years ago
• s54mtb / lora_breakout
  Breakout board for LoRa all-in-one module CMWX1ZZABZ
  ☆13Updated 5 years ago
• tom-biskupic / LabPSU
  Open Source Lab Power Supply
  ☆28Updated 3 years ago
• AravinthPanch / various-hardware-projects
  Collection of various PCB designs and Firmware for prototyping projects
  ☆15Updated 3 years ago
• DangerousPrototypes / Bus_Pirate_Ultra
  Just messing with an FPGA
  ☆25Updated 6 years ago
• ketszim97 / Mini_PD
  Miniature version of the USB_C_PD with the STUSB4500
  ☆27Updated 5 years ago
• mean00 / esprit
  Arduino style API for GD32 F1, GD32F3, GD32VF1, CH32F1, CH32V30x and STM32F1, FreeRTOS and Cmake build system included. Some rust was add…
  ☆12Updated this week
• fischermoseley / GPSDO
  GPS Disciplined Oscillator for high-precision timekeeping. More accurate than my Rubidium-based atomic clock.
  ☆28Updated 6 years ago