Alternatives and similar repositories for python-app-sdk

Users that are interested in python-app-sdk are comparing it to the libraries listed below

• pycom / pycom-micropython-sigfox
  A fork of MicroPython with the ESP32 port customized to run on Pycom's IoT multi-network modules.
  ☆198Updated 2 years ago
• pycom / pycom-libraries
  MicroPython libraries and examples that work out of the box on Pycom's IoT modules
  ☆341Updated 4 years ago
• jeroennijhof / LoRaWAN
  LoRaWAN implementation in python
  ☆124Updated 4 years ago
• TheThingsNetwork / arduino-device-lib
  Arduino Library for TTN Devices
  ☆209Updated 2 years ago
• TheThingsArchive / nodered-app-node
  Node-RED Library for TTN Applications
  ☆21Updated 6 years ago
• TheThingsNetwork / docs
  Documentation for The Things Network
  ☆63Updated last year
• kersing / packet_forwarder
  Multi protocol packet forwarder supporting the TTN gateway-connector protocol.
  ☆89Updated 2 years ago
• TheThingsNetwork / gateway-conf
  The Things Network Master Gateway Configurations
  ☆94Updated 4 years ago
• mirakonta / lora_gateway
  Driver/HAL to build a gateway using a concentrator board based on Semtech SX1301 multi-channel modem and SX1257/SX1255 RF transceivers.
  ☆107Updated 8 years ago
• things4u / LoRa-LMIC-1.51
  Port of LMIC-1.5 library tp Atmega 328 and ESP6822, including alternative AES encription library
  ☆82Updated 9 years ago
• ch2i / iC880A-Raspberry-PI
  Raspberry PI iC880A and LinkLab Lora Gateway Shield
  ☆74Updated 5 years ago
• mayeranalytics / pySX127x
  This is a python interface to the Semtech SX127x, HopeRF RFM9x, Microchip RN2483 long range, low power transceiver families.
  ☆183Updated 2 months ago
• ttn-zh / gateway-remote-config
  Provides settings for TTN gateways that receive their settings automatically on start.
  ☆54Updated 11 months ago
• bokse001 / dual_chan_pkt_fwd
  Dual Channel LoRaWAN Gateway Up and Downlink
  ☆66Updated 5 years ago
• dragino / Arduino-Profile-Examples
  Example for Dragino LoRa Devices.
  ☆87Updated 6 years ago
• boriz / MQTT-SN-Arduino
  Connecting mesh network to the MQTT broker and tunneling MQTT protocol over Websocket.
  ☆41Updated 8 years ago
• CongducPham / tutorials
  Tutorial slides for the low-cost LoRa IoT platform
  ☆116Updated 5 years ago
• tftelkamp / single_chan_pkt_fwd
  Single Channel LoRaWAN Gateway
  ☆241Updated 6 years ago
• ch2i / LoraGW-Setup
  SX1301 Lora Concentrator Raspberry PI based gateway setup
  ☆79Updated 4 years ago
• jpmeijers / RN2483-Arduino-Library
  Arduino C++ code to communicate with a Microchip RN2483 module
  ☆86Updated last week
• mallagant / uLoRaWAN
  LoRaWAN implementation in MicroPython
  ☆33Updated 6 years ago
• pycom / pymakr-atom
  Adds a REPL console to Atom that connects to your Pycom board. It can run code on the board or synchronize your project files.
  ☆35Updated 3 years ago
• thesolarnomad / lora-serialization
  LoraWAN serialization/deserialization library for The Things Network
  ☆166Updated 9 months ago
• pycom / pycom-documentation
  Pycom Official Documentation for WiPy 2.0, Wipy 3.0 LoPy, Lopy4, SiPy, FiPy, GPy, etc.
  ☆36Updated 2 years ago
• TheThingsArchive / packet_forwarder
  Packet forwarder for Linux based gateways
  ☆83Updated 7 years ago
• hallard / single_chan_pkt_fwd
  Single Channel LoRaWAN Gateway
  ☆68Updated 7 years ago
• pycom / pycom-modbus
  ☆47Updated 4 years ago
• tftelkamp / arduino-lmic-v1.5
  IBM LMIC v1.5 (LoRaWAN in C) adapted to run under the Arduino environment
  ☆43Updated 9 years ago
• chirpstack / chirpstack-ansible-playbook
  Ansible playbook for setting up ChirpStack.
  ☆86Updated last year
• jieter / python-lora
  Decrypt LoRa payloads in python.
  ☆70Updated last year