Squonk42 / OpenWrt-RT5350Links
Patches to compile OpenWrt Linux on Ralink RT5350-based routers
☆70Updated 11 years ago
Alternatives and similar repositories for OpenWrt-RT5350
Users that are interested in OpenWrt-RT5350 are comparing it to the libraries listed below
Sorting:
- Uboot and openwrt firmwares of RT5350☆83Updated 11 years ago
- The uboot source code of OrangePi 2G-IOT☆13Updated 7 years ago
- VoCore2 firmware drivers☆100Updated 4 months ago
- ☆50Updated 7 months ago
- OpenWrt patch and installation guide for HiLink HLK-RM04☆55Updated 11 years ago
- Reverse Engineering work on the TP-LINK TL-WR703N 150M 802.11n Wi-Fi Router☆256Updated 5 years ago
- Port gmediarender-resurrect to OpenWrt.☆30Updated 11 years ago
- wifi audio on rt5350☆32Updated 7 years ago
- ☆34Updated 10 years ago
- Linux kernel module driver for the ESP8266 chip for Raspberry Pi☆44Updated 9 years ago
- Drivers and Tools for RoboPeak Mini USB Display Project☆143Updated 7 years ago
- Some scripts to build and install the Realtek 8192cu driver via dkms, with concurrent mode enabled, allowing simultaneous AP and client m…☆38Updated 3 years ago
- OpenWRT feed with all JUCI related packages.☆31Updated 6 years ago
- Source Code and Utils for Lamobo-D1☆74Updated 2 years ago
- A Raspberry Pi / BCM2835 Software-based UART Linux device driver☆133Updated 2 years ago
- Tutorial on how to connect an ssd1306 oled display to OpenWRT over a usb to i2c dongle (ch341)☆36Updated 9 years ago
- A Linux kernel driver for ch341 emulating the I2C bus☆72Updated 4 years ago
- Script and binary files for mounting SD/eMMC on sunxi boards over USB OTG connection☆54Updated 7 years ago
- Add ser2net service to OpenWrt LuCI.☆15Updated 11 years ago
- The Linux kernel source code for OrangePi 2G-IOT☆20Updated 4 years ago
- ESP8266 AT+ Command Set☆71Updated 10 years ago
- ☆67Updated 8 years ago
- Supports Banana Pi BPI-R2 (MT7623N) (Kernel 4.4)☆81Updated 6 years ago
- Tool for Atheros ART partition☆47Updated 6 years ago
- Please consider the new stm32-vserprog (https://github.com/dword1511/stm32-vserprog) project which uses libopencm3 and compiles with stan…☆67Updated 9 years ago
- advanced u-boot (for sunxi Orange Pi Zero | Zero Plus2 h3 | R1, and another sunxi boards ), ready for full load linux from spi-flash, i2c…☆35Updated 6 years ago
- Port of pre-1.0 Arduino bootloader and core for the Zigduino, a shield-compatible Arduino clone based on the Atmega128RFA1.☆25Updated 12 years ago
- Supports BananaPi BPI -M1 / M1Plus / R1 / based on OpenWRT15.05-rc3☆26Updated 9 years ago
- Allwinner-Official-Documents☆23Updated 10 years ago
- FFT evaluation☆70Updated last year