Alternatives and similar repositories for smoothie-nuttx

Users that are interested in smoothie-nuttx are comparing it to the libraries listed below

• Smoothieware / smoothie-v2-for-nuttx
  Deprecated Smoothie for version 2 boards using nuttx as base
  ☆17Updated 7 years ago
• stevstrong / Adafruit_TFTLCD_16bit_STM32
  Original Adafruit library adapted to 16 bit parallel control by STM32F1/F4
  ☆16Updated 7 years ago
• Smoothieware / SmoothieV2-LPC
  Smoothie for Version2 boards
  ☆38Updated 4 years ago
• BETZtechnik / ICEpick--Direct-drive-pick-and-place-head
  Pick and Place head with dual nozzles
  ☆39Updated 5 years ago
• paltatech / bldc
  The code for my custom BLDC controller.
  ☆13Updated last year
• Dark-Guan / Ananas
  This is an Arduino based program for step motor controller,Ananas.
  ☆51Updated 8 years ago
• Smoothieware / Smoothieboard2
  Hardware files for the Smoothieboard v2, and extension boards
  ☆58Updated last year
• Dark-Guan / AnanasBoard
  ☆28Updated 8 years ago
• bdring / PSoC_Grbl
  PSoc5 Port of Grbl CNC Controller
  ☆36Updated 8 years ago
• Mortezix / pnpfeeder
  Pick and place 3d printable feeder
  ☆17Updated 8 years ago
• joewa / bldc-strip
  OpenBLDC Strip (STM32F103)
  ☆67Updated 8 years ago
• labnation / DeviceInterface
  ☆25Updated 6 years ago
• IRNAS / grbl_stm32
  grbl for stm32 with nucleo stepper drivers
  ☆37Updated 9 years ago
• LaosLaser / Firmware
  Embedded software (firmware) for the laser system and components, including configuration files
  ☆27Updated last year
• Smoothieware / SmoothieV2
  Version 2 smoothie for the STM32H7xx
  ☆33Updated 2 months ago
• fra589 / grbl_post
  FreeCAD Path post processor for Grbl with drilling cycles (G81, G82 & G83) conversions to G0/G1 moves.
  ☆10Updated 3 years ago
• KiCad / kicad-packages3D-source
  Source files for generating 3D models
  ☆50Updated 3 years ago
• Ralim / Open-BMS
  ISL94202 & MSP430 based BMS
  ☆43Updated 4 years ago
• sergei-iliev / myNetPCB
  PCB Layout and Schematic capture tool for Win/Linux/Mac
  ☆21Updated 4 months ago
• clementleger / Smoothieware-STM32
  [DEPRECATED] Modular, opensource, high performance G-code interpreter and CNC controller written in Object-Oriented C++
  ☆38Updated 9 years ago
• compuphase / KiCad-Librarian
  A library manager for KiCad, with a template-driven generation of symbols, footprints and 3D models.
  ☆41Updated 6 years ago
• Rejdok / STM32-Marlin-Port
  ☆29Updated 6 years ago
• LinuxCNC / hostmot2-firmware
  HostMot2 FPGA firmware
  ☆21Updated 4 years ago
• jonatanolofsson / maple-bootloader
  Bootloader firmware for the Maple ARM Cortex-M3 development board from LeafLabs
  ☆25Updated 10 years ago
• gbulmer / openstm32hw
  Open Source Hardware for STM32, complementing openstm32
  ☆48Updated 11 years ago
• imrahil / smoothieware-webui
  Better webUI for Smoothieware
  ☆22Updated 8 years ago
• cdsteinkuehler / bobc_hardware
  CRAMPS - A Cape version of the RAMPS-FD design for 3D printing
  ☆45Updated 6 years ago
• leaflabs / maple-ide
  Development environment for the Maple ARM Cortex-M3 development board; forked from Arduino
  ☆58Updated 11 years ago
• mnd / libstm8
  Library for STM8 microcontroller
  ☆19Updated 10 years ago
• langwadt / grbl_stm32
  grbl for stm32 with nucleo stepper drivers
  ☆33Updated 4 years ago