SensorsIot / NTP-Server-with-GPSLinks
☆26Updated 5 months ago
Alternatives and similar repositories for NTP-Server-with-GPS
Users that are interested in NTP-Server-with-GPS are comparing it to the libraries listed below
Sorting:
- Using an ESP32 and OLED with a basic microphone to decode Morse Code live to the display☆57Updated 3 years ago
 - ESP32 Oscilloscope clock using internal DACs, with WiFi ntp sync☆72Updated 4 years ago
 - Feather Huzzah ESP2866/ESP32 + Featherwing 128x64 OLED Arduino addon to Mightohm Gieger☆20Updated 10 months ago
 - Autosetting clock based on an epaper display. Runs about a year on batteries and has basic weather telemetry (temperature, pressure, hum…☆46Updated 2 years ago
 - ☆61Updated last year
 - Materials for Arduino Compatible OpenSource Geiger Counter-V1.1☆83Updated last year
 - Arduino code for ABBrobot OLED module☆24Updated last year
 - A collection of Arduino sketches for the "Cheap Yellow Display" board(s)☆164Updated 6 months ago
 - ☆29Updated 2 years ago
 - Control Program for Electronic Loads XY-FZ25 and XY-FZ35☆29Updated 7 months ago
 - ☆18Updated 5 months ago
 - A FreeDV device based on the ESP32.☆105Updated last year
 - ☆152Updated 3 years ago
 - Some important information about V5A☆18Updated last year
 - Noise resilient DCF77 decoder library for Arduino☆99Updated 6 months ago
 - Portable Digital FM Radio Receiver with RDS☆65Updated 11 months ago
 - WiFi-enabled GNSS (GPS, BeiDou, GLONASS, Galileo) fed NTP/RDATE server based on ESP8266/ESP32 and Arduino☆153Updated 7 months ago
 - ☆25Updated 11 months ago
 - A small hardware device for transmitting WSPR messages based on the SI5351 IC which uses GPS for transmission time synchronization and au…☆95Updated this week
 - Improved antuino software☆46Updated 6 years ago
 - Introducing OpenRad, a simple radiation monitoring solution powered by the SBM-20 GM tube and TTGO ESP32 microcontroller. this project of…☆58Updated 10 months ago
 - ☆44Updated last year
 - Use an Arduino to beep out a morse code message including GPS position☆53Updated 10 years ago
 - ☆32Updated last year
 - ☆64Updated 2 years ago
 - LilyGO T-Display S3 setup and examples for Arduino IDE☆180Updated 6 months ago
 - ☆21Updated 5 years ago
 - ☆151Updated last year
 - A simple cost-effective demo, test, training, board for an oscilloscope made from a Raspberry Pi Pico☆59Updated 10 months ago
 - ☆25Updated 2 years ago