PetteriAimonen / ED060SC4_driverLinks
Driver for the ED060SC4 E-ink display
☆219Updated 9 years ago
Alternatives and similar repositories for ED060SC4_driver
Users that are interested in ED060SC4_driver are comparing it to the libraries listed below
Sorting:
- ice40 FPGA eink controller☆116Updated 6 years ago
- Internet Connected or Standard Input EPaper Display☆82Updated 8 years ago
- A simple calendar using EPD (E-ink) as display based on STM32 microcontroller☆199Updated 7 years ago
- Breadboard-able Cortex A7 dev board☆208Updated 5 years ago
- Footprints for the Espressif ESP32 WiFi/BLE Chip and ESP3212 module, for KiCAD EDA☆197Updated 7 years ago
- Autonomous wireless sensor/actuator node using bluetooth modules based on CSR BlueCore chipset. See wiki for more info.☆154Updated 7 years ago
- Starting point and shared code for Nordic nRF5x BLE platforms.☆91Updated 4 years ago
- SEPTA Smart City Street Sign☆25Updated 9 years ago
- A tiny ARM microprocessor which fits in your USB port.☆364Updated 4 years ago
- DS203 quad oscilloscope firmware compatible with gcc☆294Updated 5 years ago
- A firmware-only half-duplex 10Base-T implementation for AVRs☆134Updated last year
- ☆92Updated 6 years ago
- Trying to make ESP8266 projects without a big SDK.☆280Updated last year
- Small breadboard friendly STM32 (eventually other mcu's too) eval boards with exposed JTAG and SWD for the use with Black Magic Probe and…☆66Updated 5 years ago
- Documentation for my BrainyV2 series of Linux SBC's☆209Updated 9 months ago
- Access Dallas 1-Wire bus on your PC via low-cost USB to UART bridge.☆166Updated 8 years ago
- A purely software based USB peripheral for ARM Cortex M0+ devices☆114Updated 11 years ago
- A clone of the i2c-tiny-usb based upon STM32 and libopencm3☆143Updated 2 years ago
- Software UART implementation for the AVR platform☆87Updated 14 years ago
- ARM related stuff☆124Updated 9 years ago
- Pocket sized ESP32 display board with 180µW Always On Display☆252Updated 5 years ago
- An open hardware embedded SBC for the NXP i.MX8M Mini application processor☆127Updated 2 months ago
- STM8 eForth - a user friendly Forth for simple µCs with docs☆322Updated last month
- A breakout board for the FUSB302 USB Power Delivery PHY☆110Updated 6 years ago
- Software USB stack☆190Updated 8 years ago
- Arduino on a mini-PCIe card☆100Updated 10 years ago
- Code, final versions, and information on the SparkFun Graphical Datasheets☆149Updated last year
- Cheap and simple I²C to USB interface☆421Updated 2 years ago
- Easy PDK programmer for PADAUK microcontroller. EDA, schematic, gerber, bom, housing stl, firmware☆187Updated last year
- SPI driver public repo☆194Updated 2 years ago