Alternatives and similar repositories for mbed-health-monitor

Users that are interested in mbed-health-monitor are comparing it to the libraries listed below

• havenxie / stm32-iap-dfu
  STM32的USB DFU升级，包括BOOT部分的Device_Firmware_Upgrade和App部分的Custom_HID
  ☆17Updated 3 years ago
• slkakad / SVPWM
  space vector modulation for 3 phase inverter
  ☆16Updated 8 years ago
• shuai132 / SimpleOscillograph_For_STM32
  虚拟示波器（FOR STM32F103&F030&F401）
  ☆21Updated 5 years ago
• zhangjinxing / BIN2HS
  支持Bin与Hex和Srecord记录之间的解析和转换的库
  ☆13Updated 8 years ago
• plumbum / usb2can
  USB/Serial to CAN bus converter
  ☆21Updated 8 years ago
• leiyitan / A-Digital-Wireless-Voice-Remote-Controller
  STM32F103RC+433无线数传模块+1.12寸OLED+语音播报+电池-遥控器
  ☆27Updated 6 years ago
• 1847123212 / SUDA_F1C100S
  Open Source for Allwinner SoC F1C100S
  ☆18Updated 7 years ago
• RoanBrand / STM32SerialToTCPBridgeClient
  STM32 based client for SerialToTCPBridgeProtocol PC side service
  ☆10Updated 9 years ago
• oshwcom / BLDC_STC15W401
  低成本（RMB 7元左右）12V的bldc驱动电路。基于STC15W401AS单片机。
  ☆28Updated 7 years ago
• 596142041 / STM32-DSP_CAN_Boot
  ☆10Updated 8 years ago
• GaoleiBai / lin_sniffer
  Lin bus sniffer
  ☆18Updated 8 years ago
• 345161974 / STM8S_EV1527_RF_MODULE
  RF Module with STM8S103F3P6 and EV1527
  ☆11Updated 9 years ago
• DieBieEngineering / DieBieCANToUSB
  CAN to USB converter based on the cantact
  ☆13Updated 6 years ago
• HTCTEK / H7PI_Samples
  Samples project for H7PI，run on qspi flash
  ☆12Updated 5 years ago
• KitSprout / QCopterMachineVision
  攝像板 MachineVision，使用 STM32F429ZG
  ☆32Updated 9 years ago
• traxxas / stm32f427bootloader
  Firmware upgrade STM32F427 via firmware on microSD card
  ☆10Updated 9 years ago
• mocona05 / CAN-BUS-TO-USB-UART-STM32F042-
  CAN-BUS TO USB-UART(STM32F042)
  ☆23Updated 9 years ago
• xjtuecho / USBCAN
  A low-cost compact USB to CAN adapter.
  ☆25Updated last year
• zenglongGH / stm32f4-CANopen-project
  Empty stm32f4 project with canopen-node integrated
  ☆13Updated 11 years ago
• Youssifm / STM32_And_Neopixel_WS2812_LED_Matrix
  Here is my code controlling the ws2812b/apa-106 LEDs with a STM32F103C8T6. This code utilizes Timer 2 channel 3 and DMA1 channel 1. Timer…
  ☆23Updated 9 years ago
• ADTL / stm32f4-canopennode
  CANopenNode as used on our Cortex-M4 controllers.
  ☆12Updated 12 years ago
• fancy3013 / NRF24L01_WriessUart
  使用时最好关闭ACK，否则假如对方不支持应答会导致工作不正常
  ☆10Updated 10 years ago
• KitSprout / RedBeanSprout
  ARM Cortex-M3/M4 STM32F103C/F303C Development Kit
  ☆34Updated 8 years ago
• WeSpeakEnglish / STM32PLC
  The PLC based on STM32F746
  ☆21Updated 5 months ago
• sahil-kale / SensorlessESCSoftware
  Sensorless BLDC motor controller firmware (STM32)
  ☆23Updated 3 years ago
• lawsonkeith / STM3210E-EVAL_CAN_Networking
  STM32F103C8T6 CAN implementation
  ☆17Updated 9 years ago
• CharlesHe023 / firmware-cortex-m
  A gui for Jlink commander，Flash erase，firmware download，read UID
  ☆16Updated 8 years ago
• rusoku / CANAL-View
  CANAL View Qt GUI for TouCAN USB to CAN bus converter
  ☆23Updated 2 years ago
• ScarsFun / STM32F030_MAX30102
  Simple STM32 oximeter based on MAX30102 ad SSD1306 Display
  ☆13Updated 5 years ago
• KitSprout / IMUCube
  BLE, IMU and LED Development Kit，Use nRF51822 + MPU6500 + WS2812B
  ☆51Updated 9 years ago