Mottramlabs / 4-Channel-Mains-Current-SensorLinks
A 4-Channel mains sensor board with an option for either a Wemos D1 Mini or an ESP-12 WiFi module
☆19Updated 3 years ago
Alternatives and similar repositories for 4-Channel-Mains-Current-Sensor
Users that are interested in 4-Channel-Mains-Current-Sensor are comparing it to the libraries listed below
Sorting:
- RFLink for ESP, with MQTT client☆158Updated 2 months ago
- Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)☆120Updated 4 years ago
- Arduino library and hardware shield to send and receive data from Opentherm devices☆176Updated 2 years ago
- Bresser 5-in-1/6-in-1/7-in-1 868 MHz Weather Sensor Radio Receiver for Arduino based on CC1101, SX1276/RFM95W, SX1262 or LR1121☆146Updated last week
- Split Single-phase Energy Meter☆279Updated 6 months ago
- Use an ESP8266 to read live-, statistical- and status-data from an EpEver LandStar (LS1024B) via Modbus and publish using MQTT☆32Updated 6 years ago
- Backup/restore and decode configuration tool for Tasmota☆234Updated 2 weeks ago
- This project is for connecting to EPEver charge controllers over WiFi for viewing running stats and also allows automatic posting of them…☆73Updated 11 months ago
- Home Assistant / Domoticz tested with a RFLink, modified for ESP8266 and ESP32☆109Updated 3 years ago
- ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE☆164Updated this week
- esp8266, serial bus to mqtt for Paradox alarm systems☆82Updated 3 years ago
- Arduino/ESP8266/ESP32 OpenTherm Library for HVAC system control communication☆243Updated 10 months ago
- RFLink for ESP, with MQTT client☆73Updated 2 years ago
- reading SDM72 SDM120 SDM220 SDM230 SDM630 modbus energy meters from arduino (esp8266, esp32, avr)☆257Updated 11 months ago
- Alternative Firmware for the Sonoff RF Bridge EFM8BB1 chip☆297Updated 3 years ago
- Simple library for Arduino (ESP32) to control a Chinese diesel heater through 433 MHz RF☆98Updated 4 years ago
- ☆122Updated 2 years ago
- ESP8266 gateway between RFLink and MQTT server☆99Updated 3 years ago
- Firmware for ESP8266 allowing eBUS communication for ebusd (https://github.com/john30/ebusd)☆155Updated last year
- ☆47Updated 2 years ago
- Hardware & Software documentation for the CircuitSetup Expandable 6 Channel ESP32 Energy Meter. Works with ESPHome and Home Assistant.☆600Updated 2 weeks ago
- sonoff firmwares☆17Updated 7 months ago
- An ESP32 arduino sketch that searches for a compatible Airthings device and publishes the radon level, temperature, and humidity to an MQ…☆23Updated 3 years ago
- Device to measure energy and temperature☆80Updated 6 years ago
- EPSolar Solar Charge Controller to MQTT☆43Updated 3 years ago
- ESPHome component to monitor and control some Atorch meters via bluetooth☆80Updated 2 weeks ago
- reverse-engineered schematics and interface software☆92Updated last year
- Direct communication between esp devices without home assistant☆220Updated 4 years ago
- MQTT 433.92 MHz radio-frequency device gateway☆137Updated 2 years ago
- Video & audio doorbell for Home Assistant: ESP32 Cam, DFPlayer Mini, ESPHome☆189Updated last year