iomonad / abloy-3d-printLinks
An OpenSCAD library for parametrically generating several ABLOY keys models suitable for 3D printing.
☆15Updated 4 years ago
Alternatives and similar repositories for abloy-3d-print
Users that are interested in abloy-3d-print are comparing it to the libraries listed below
Sorting:
- Open Source Search and Rescue Tool for ground tracking and air tracking cell phone signatures using Espressif ESp32 and ESP8266 hardware.☆29Updated 4 years ago
- Arduino RF rolling code keeloq receiver☆22Updated 11 months ago
- A FreeDV device based on the ESP32.☆105Updated 10 months ago
- An Arduino API that sits on top of Linux and other operating systems. This lets you run Arduino code on Raspberry PI, desktops, etc... A…☆50Updated last year
- Open source PCB the size of a credit card that is capable of detecting the field generated by a RFID reader and identify if it is a LF(12…☆12Updated 7 years ago
- Open source firmware for NiceRF SA8x8 allowing arbitrary digital radio protocols☆48Updated 2 months ago
- LinHT - Linux-based, SDR handheld transceiver.☆95Updated 3 weeks ago
- This project aims to develop a CAN (Controller Area Network) adapter for the Flipper Zero, allowing users to connect devices with a CAN i…☆39Updated 7 months ago
- Programmable walkie-talkie.☆135Updated last month
- Based on Radioberry designd by" https://github.com/pa3gsb/Radioberry-2.x"☆72Updated 2 years ago
- A minimalist 1W LoRA PCB design for Meshtastic-device firmware☆134Updated 2 years ago
- Restaurant Paging Service based on ESP32 and SX1278 for Long Range Systems, POCSAG or Retekess☆42Updated last year
- ESP32 SOftware COntrolled RADio (SOCORAD32)☆176Updated 8 months ago
- Allows you to use an Arduino to capture LoRa radio network traffic and transfer to a PC for viewing or saving to disk.☆64Updated 8 years ago
- Arduino library for DRA818 VHF/UHF Band Voice Transceiver☆47Updated last year
- PYCC1101 a simple Python wrapper for the CC1101 RF Transceiver. I've been using it with a CC1101 Arduino module connected trough SPI to a…☆38Updated 4 years ago
- Projet Arduino tracker APRS☆21Updated 3 years ago
- Expansion board for Raspberry PI allowing to use coaxial SMA output instead of direct wire connection to GPIO to connect radio equipment …☆34Updated 8 months ago
- ESPboy messenger with LORA module based on EBYTE solution. Up to 8km encrypted chat. Almost absolute privacy )☆21Updated 2 months ago
- A custom meshtastic PCB based on ESP32-S3 and LoRa RA-01SH☆17Updated 4 months ago
- Enclosures for Meshtastic devices☆56Updated 10 months ago
- ATS-20 radio schematic☆32Updated 3 years ago
- Blog about my journey investigation uhf-rfid with arduino and cc1101☆49Updated 3 years ago
- ☆63Updated last month
- Use an Arduino to beep out a morse code message including GPS position☆53Updated 10 years ago
- 3D model and case for the LILYGO T-TWR Plus (https://www.lilygo.cc/products/t-twr-plus)☆22Updated 2 years ago
- A small hardware device for transmitting WSPR messages based on the SI5351 IC which uses GPS for transmission time synchronization and au…☆93Updated 5 months ago
- ☆28Updated 2 years ago
- A SDR PCB project base on msi2500 and msi001☆60Updated 3 years ago
- PCBs i've made for meshtastic☆100Updated last week