MicrochipTech / TB3209_Getting_Started_with_ADCLinks
This repository contains examples of bare metal source code for ADC as described in TB3209 document from Microchip. The code examples were developed using ATmega4809
☆15Updated 4 years ago
Alternatives and similar repositories for TB3209_Getting_Started_with_ADC
Users that are interested in TB3209_Getting_Started_with_ADC are comparing it to the libraries listed below
Sorting:
- TinyCore boards / attiny 1 series Core, Arduino IDE Core, targets ATtiny 417 / 814 / 816 / 817 / 1614 / 1616 / 1617 / 3217 and similar MC…☆38Updated 4 years ago
- Saleae Logic Analyzer for the NEC/IR-Remote Protocol☆51Updated 9 years ago
- Arduino/Avr compatible libraries to control timers☆24Updated 5 years ago
- opensource esp32 wireless oscilloscope☆106Updated 6 years ago
- Small ESP32 PCB to drive LED Strips☆12Updated 6 years ago
- 7.2MHz logic analyzer speaking the SUMP protocol for the stm32f103☆90Updated 4 years ago
- PC tool for uplading hexfiles to the STM8 microcontroller via UART or SPI , using the built-in ROM bootloader. Works under Windows and Po…☆87Updated last year
- The code and schematic used for reconfiguring a UYue 946-1010 Preheater as a solder reflow hot plate.☆18Updated last year
- STM32F103 based minimalist oscilloscope.☆192Updated 7 years ago
- Code, final versions, and information on the SparkFun Graphical Datasheets☆149Updated last year
- Logic Analyzer for the Teensy development boards (pjrc.com/teensy)☆87Updated 4 years ago
- CMSIS-DAP USB-SWD/JTAG adapter firmware for Pro Micro and Teensy 3.2 boards☆90Updated 2 years ago
- A place to store things that are in discussion but don't have a home yet.☆19Updated 6 years ago
- OSC Calibrator and High-Voltage Fuse Resetter for 8-Pin ATtinys☆58Updated 3 years ago
- Bus Pirate NG firmware and hardware☆40Updated 2 years ago
- Library for basic interfacing with BQ4050 battery fuel gauge from TI☆19Updated 5 years ago
- Программная реализация USB на STM8S103☆102Updated 9 years ago
- Use raspberry pi as a logic analyser☆84Updated 4 years ago
- Automatically exported from code.google.com/p/dangerous-prototypes-open-hardware☆86Updated 2 years ago
- Alternative firmware for a cheap X-40 laser tape measure☆131Updated 4 months ago
- Arduino-based solution for programming PIC microcontrollers.☆73Updated 4 years ago
- My Arduino boards custom variants. You can use it as starting point for your boards specialities.☆18Updated last year
- GCC compiler restrictions removal☆55Updated 3 years ago
- Implementation of an sPWM signal☆167Updated 3 years ago
- Enables reading and writing on SD card using SD card slot of the STM32 Board.☆174Updated 8 months ago
- LCR meter project. An Inductance, Capacitance and Resistance meter, Arduino NANO(v3) based.☆98Updated last year
- Open Source Hardware OSHW ESP32 development board designed with KiCAD to be pin to pin compatible with Espressif ESP32-DevKitC, but with …☆84Updated 5 months ago
- USB-C Power Delivery on Arduino☆94Updated 5 years ago
- ☆25Updated 4 years ago
- KiCad + STM32F4 + USB + Buck converter video reference/test PCB.☆171Updated 5 years ago