Alternatives and similar repositories for RasPi_stage_intercom:

Users that are interested in RasPi_stage_intercom are comparing it to the libraries listed below

• dirkx / SMPTE-EBU-TimecodeGenerator-ESP32
  ESP32 based SMPTE/EBU timecode generator, with NTP slaving, for Leitch and similar studio/broadcast clocks.
  ☆51Updated last year
• NoahCallaway / TallyArbiter-arduino-neopixel
  ☆12Updated 4 years ago
• aaronpk / m5-core2-atem-controller
  An ATEM controller using an M5 Core2
  ☆11Updated 3 years ago
• utopiantools / visca-ip-proxy-arduino
  Uses a WiFi enabled microcontroller to proxy VISCA commands from UDP to RS-232 and vice versa.
  ☆12Updated 3 years ago
• matiaspl / intercom
  A githubbed version of DIY intercom system based on Mumble voice chat server and headless client running on Raspberry Pis.
  ☆53Updated 9 months ago
• hobbyquaker / mqtt-dmx-controller
  A simple ArtNet / DMX Controller with MQTT Interface 💡🎬
  ☆66Updated 5 years ago
• foxworth42 / arduino-VISCA-controller
  Arduino based VISCA controller for Cisco TelePresence Precision series of cameras
  ☆26Updated 4 years ago
• Miceuz / StepperOverDMX
  A system to control a stepper motor over DMX protocol.
  ☆13Updated 5 years ago
• hennedo / wifitally
  An ESP8266 / M5StickC based tally light for use with Blackmagic ATEM.
  ☆27Updated 2 years ago
• signorettae / ESP32-ArtNet-to-DMX
  A simple ArtNet-to-DMX converter based on an ESP32 board
  ☆32Updated last year
• rpitv / atem-tally
  Node.js ATEM tally interface built to run on a Raspberry Pi over XLR cables
  ☆23Updated last year
• jeremywillden / visca-stick
  USB Joystick control of VISCA-compatible PTZ video cameras
  ☆13Updated 3 months ago
• darknessii / rpi-matrix-artnet
  Controlling of 32x32 or 16x32 RGB LED displays using Raspberry Pi rpi-rgb-led-matrix with Art-Net
  ☆32Updated 6 years ago
• mtongnz / DMX_LED_Strips
  Arduino DMX controller for RGB LED strips.
  ☆28Updated 8 years ago
• chaosloth / Connotron_DMX_Gateway
  ArtNet to DMX Gateway on ESP32 via WIFI
  ☆26Updated 2 years ago
• CustomMachines / talkiepi
  The talkiepi project is for a truly headless mumble client for the Raspberry Pi, utilizing static config and GPIO for status LEDs and a b…
  ☆37Updated 4 years ago
• mrv96 / ESP8266_ArtNetNode_v2
  ESP8266 based WiFi ArtNet to DMX, RDM and LED Pixels
  ☆14Updated 3 years ago
• claudeheintz / LXDMXWiFi_Library
  Library for ESP8266 implements Art-Net and sACN with example DMX input/output to/from network
  ☆76Updated 2 years ago
• Xinyuan-LilyGO / T-RSC3
  ☆17Updated last year
• jimparis / DmxReceiver
  DMX Receiver Arduino driver for Teensy 3.1 boards
  ☆14Updated 10 years ago
• hobbyquaker / mqtt-dmx-sequencer
  Control DMX devices via Art-Net by MQTT. Includes a simple sequencer. 💡🎬
  ☆24Updated 7 years ago
• cnlohr / esp8266_dmx_explorer
  ☆34Updated 4 years ago
• Julusian / arduino-lanc
  Arduino based LANC to serial
  ☆16Updated 8 years ago
• witnessmenow / Falling-Sand-Matrix
  A falling sand simulation using an ESP32, RGB Led Matrix and an accelerometer
  ☆44Updated 5 years ago
• ITEAD-Thierry / NextionX
  A new, alternative and universal library to interact with Nextion HMI displays from Arduino and compatible MCUs.
  ☆13Updated 2 years ago
• todbot / CircuitPython_MicroOSC
  Minimal OSC parser, server, and client for CircuitPython and CPython
  ☆11Updated last year
• ButschFPV / OBS_TALLY_V2
  Arduino based OBS Tally-light with esp8266 and WS2812b LEDs. The communication is established via WebSocket plugin.
  ☆10Updated last month
• vanvught / h3dmx512-zip
  Images for Allwinner H2+/H3 DMX512 / RDM / Art-Net / sACN / USBPro / Pixel / WS28xx / TCNet / SMPTE
  ☆88Updated 2 weeks ago
• xadacka / led-matrix-controller
  Web based controller for led panels. Control a chain of up to 12 32x16 panels via a web interface, easily update text and run animations.
  ☆17Updated 2 years ago
• claudeheintz / LXESP8266DMX
  DMX Driver for ESP8266 using ArduinoIDE
  ☆31Updated 2 years ago