aaronpk / m5-core2-atem-controller
An ATEM controller using an M5 Core2
☆11Updated 3 years ago
Alternatives and similar repositories for m5-core2-atem-controller:
Users that are interested in m5-core2-atem-controller are comparing it to the libraries listed below
- ☆36Updated 4 years ago
- ESP32 based SMPTE/EBU timecode generator, with NTP slaving, for Leitch and similar studio/broadcast clocks.☆51Updated last year
- Uses a WiFi enabled microcontroller to proxy VISCA commands from UDP to RS-232 and vice versa.☆12Updated 3 years ago
- Arduino Mini and TLC5940 based 32 channel 12V PWM dimmer with DMX512 and RDM support.☆12Updated 8 months ago
- The talkiepi project is for a truly headless mumble client for the Raspberry Pi, utilizing static config and GPIO for status LEDs and a b…☆27Updated 6 years ago
- Arduino based LANC to serial☆16Updated 8 years ago
- SMPTE/LTC decoder for Teensy 3.2 microcontroller audio shield☆23Updated 3 years ago
- An ESP8266 / M5StickC based tally light for use with Blackmagic ATEM.☆27Updated 2 years ago
- Library for ESP8266 implements Art-Net and sACN with example DMX input/output to/from network☆76Updated 2 years ago
- Arduino DMX controller for RGB LED strips.☆27Updated 7 years ago
- vTally - Wireless Tally and VISCA converter for vMix☆16Updated 2 years ago
- Arduino based VISCA controller for Cisco TelePresence Precision series of cameras☆26Updated 3 years ago
- Arduino based OBS Tally-light with esp8266 and WS2812b LEDs. The communication is established via WebSocket plugin.☆10Updated 3 weeks ago
- ☆11Updated last month
- ArtNet to DMX Gateway on ESP32 via WIFI☆26Updated 2 years ago
- A library for connecting an Arduino with Ethernet shield to Blackmagic Designs ATEM video switcher range.☆18Updated 12 years ago
- Connect an arduino to a ham radio speaker and command a 12v led strip remotely using DTMF code and signal detection☆11Updated 7 years ago
- ☆12Updated 4 years ago
- ☆67Updated 7 months ago
- Simple ArtNet do DMX node for ArduinoUno☆43Updated last year
- A simple ArtNet-to-DMX converter based on an ESP32 board☆29Updated last year
- Tally light control for OBS, for use with tally_circuitpy or tally_pi☆17Updated 3 months ago
- A script to run on a M5Stick-C to use the device as a Tally Light for vMix☆75Updated 3 years ago
- ESP8266 based WiFi ArtNet to DMX, RDM and LED Pixels☆14Updated 3 years ago
- All design files for SKAARHOJ open projects. They are available to you under Creative Commons CC-by-sa unless otherwise noted. See http:/…☆245Updated 4 years ago
- A simple ANSI E1.31 (aka sACN) module for python.☆47Updated 5 months ago
- A multifunctional DMX ArtNet Box based on ESP8266☆15Updated 7 years ago
- ESP8266 based WiFi ArtNet to DMX - Supports 2 full universes☆100Updated 7 years ago
- Arduino library for a Art-Net-Node (artnet) over WiFi, handle DMX data and response to Poll requests. Runs on ESP8266, ESP32, WiFi101 and…☆83Updated 2 months ago
- Images for Allwinner H2+/H3 DMX512 / RDM / Art-Net / sACN / USBPro / Pixel / WS28xx / TCNet / SMPTE☆86Updated 3 weeks ago