sebokmarton / esphome-influxdb-cloud
Component & example project for sending sensor data to cloud
☆11Updated last year
Alternatives and similar repositories for esphome-influxdb-cloud:
Users that are interested in esphome-influxdb-cloud are comparing it to the libraries listed below
- An ESP32-based controller to control MaxxFan and Houghton air conditioner using ESPHome and Home Assistant☆21Updated last month
- ☆13Updated 2 years ago
- ☆50Updated 3 years ago
- esphome component that sends and receives ICMP☆58Updated 2 years ago
- Python connector and ESPHome template for Bluetooth based Battery Monitors - reverse engineering.☆71Updated 6 months ago
- ESPhome Projects & Components☆23Updated last year
- Code for varios IoT devices☆62Updated 5 years ago
- ☆36Updated 5 months ago
- Bresser 5-in-1/6-in-1/7-in-1 868 MHz Weather Sensor Radio Receiver for Arduino based on CC1101, SX1276/RFM95W, SX1262 or LR1121☆136Updated last week
- A simple syslog component for esphome☆68Updated 7 months ago
- Home Assistant - Thermostat Touch Nextion - Firmware ESPHOME☆22Updated 2 years ago
- ☆29Updated last year
- This package implements ESPHome components to low-code support Bluetooth Low Eneregy BTHome device standalone reception, and a leverage t…☆59Updated 11 months ago
- ESPHome configuration for M5Stack's PM2.5 Air Quality Kit with the PMSA003 particulate matter sensor and the SHT20 temperature and humidi…☆50Updated last year
- RFLink for ESP, with MQTT client☆72Updated 2 years ago
- OpenTherm library to create thermostat for OpenTherm enabled boilers and HVACs using an OpenTherm controller and an ESP32 or other microc…☆70Updated 2 years ago
- Home Assistant / Domoticz tested with a RFLink, modified for ESP8266 and ESP32☆109Updated 3 years ago
- ESP8266 Electricity meter -> MQTT bridge☆22Updated 3 years ago
- ☆91Updated 5 months ago
- ESPHome component to monitor and control some Atorch meters via bluetooth☆75Updated 3 weeks ago
- ☆30Updated last month
- ☆52Updated 9 months ago
- RFLink for ESP, with MQTT client☆148Updated 7 months ago
- ☆117Updated 2 years ago
- ESPHome configuration example to create an animated clock using the Neopixel 60 LED ring☆36Updated 2 months ago
- Device to measure energy and temperature☆80Updated 6 years ago
- Add Home Assistant support to your RDTech power supply☆43Updated 6 months ago
- A custom extension for Tasmota firmware to build a gateway capable of receiving 433 MHz wireless temperature-humidity sensor data and sen…☆11Updated 11 months ago
- ☆28Updated last year
- ☆47Updated last month