Klusjesman / IthoEcoFanRFTLinks
Control the Itho Daalderop Eco Fan RFT using a microcontroller and CC1101 chip. The code is fully tested using a STK500 and ATMega328P. The following Itho commands are working: standby, low, medium, high, fullspeed, 3 different timers, join and leave. The code will give you full remote control over the Itho Eco Fan RFT.
☆13Updated 7 years ago
Alternatives and similar repositories for IthoEcoFanRFT
Users that are interested in IthoEcoFanRFT are comparing it to the libraries listed below
Sorting:
- Control the Itho Daalderop Eco Fan RFT using a microcontroller and CC1101 chip. The original code is fully tested using a STK500 and ATMe…☆54Updated last year
- MQTT 433.92 MHz radio-frequency device gateway☆137Updated 2 years ago
- Control the Itho Daalderop Eco Fan RFT using ESP8266 / Nodemcu☆20Updated 4 years ago
- Use the ESP8266 to control your home MiLights using the WiFi gateway bridge connected to the MiLights.☆10Updated 5 years ago
- ☆23Updated 7 years ago
- MySensors bootloader supporting over-the-air firmware updates☆61Updated 2 years ago
- Home Assistant / Domoticz tested with a RFLink, modified for ESP8266 and ESP32☆111Updated 3 years ago
- Itead Studio SonoffSC custom firmware with MQTT and Domoticz support☆104Updated 6 years ago
- Arduino library for home control☆51Updated 8 years ago
- Send data from dht and soil hygrometer by 433Mhz RF with a power consumption of 5uA☆23Updated 8 years ago
- Library to simulate multiple Somfy remote controls.☆32Updated 4 years ago
- RF433Mhz decoding library☆61Updated 2 years ago
- ESP8266 based logger for GoodWe inverters. Can upload to pvoutput and publishes MQTT topics☆97Updated 2 years ago
- Plugin ideas, concepts, user contributed, etc☆192Updated last year
- Arduino library and hardware shield to send and receive data from Opentherm devices☆177Updated 2 years ago
- ESPiLight - pilight 433.92 MHz protocols library for Arduino☆119Updated 2 years ago
- esp32-based mqtt node to control EQ-3 BLE TRVs☆145Updated 3 years ago
- ESP8266 based bidirectional bridge between MQTT and IR (change MQTT message to IR signal and change received IR signal to MQTT message)☆145Updated 4 years ago
- Ir Send - Updated for HVAC Mitsubishi & Panasonic IR☆262Updated 5 years ago
- homeduino / 433mhz WIFI gateway based on the ESP8266☆17Updated 9 years ago
- Device to measure energy and temperature☆80Updated 6 years ago
- Sonoff IR remote controll extension☆58Updated 8 years ago
- RFLink for ESP, with MQTT client☆74Updated 2 years ago
- New firmware for the DSMRlogger heavily using WebSockets and Javascript☆31Updated 2 years ago
- 433MHz temperature and humidity sensor receiver that integrates with home automation systems.☆192Updated last year
- Receive data from Davis Vantage Vue ISS - Weather Station and publish Measurements via MQTT☆17Updated 2 years ago
- A class to collect data from a energy monitor that uses modbus protocol.☆47Updated 5 years ago
- Readout of EMS protocol datagrams and transfer of data to Domoticz via Arduino☆90Updated 4 years ago
- ☆24Updated 8 years ago
- ESP32 BLE client for Xiaomi Mi Plant sensors☆188Updated 4 years ago