Jason0816 / FPGA_ControllerLinks
QT FPGA控制器
☆13Updated 6 years ago
Alternatives and similar repositories for FPGA_Controller
Users that are interested in FPGA_Controller are comparing it to the libraries listed below
Sorting:
- 这是一个使用Qt框架开发的USB应用层通信组件，内部对libusb的常用api接口进行了二次封装，方便开发使用。☆39Updated 7 months ago
- 基于Qt的虚拟示波器软件☆29Updated 5 years ago
- LaserHMI is a Qt-based project to supply control and monitor of Projector Laser Light Source in cinema.☆31Updated 8 years ago
- 基于Qt的虚拟示波器☆47Updated 9 years ago
- Automatically exported from code.google.com/p/lxyppc-serial☆25Updated 6 years ago
- 远程在线升级程序 ，Qt，CAN，TCP，UDP，MODBUS☆21Updated 7 years ago
- A PID Control Simulator build with Qt.☆21Updated 7 years ago
- 综合测控项目，使用Qt☆31Updated 5 years ago
- IEC61850 ICD file Creator and Editor by Qt☆15Updated 8 years ago
- Computer serial port waveform drawing tool☆52Updated 5 years ago
- 4通道CMOS相机上位机项目描述：硬件FPGA进行CMOS图像采集，通过网络传输数据，然后在PC上实现4通道CMOS图像显示；上位机可以通过界面操作完成对相机的控制。☆28Updated 7 years ago
- 基于Qt开发环境，开发能够实时显示数据曲线的串口助手，实现串口参数的设置、通信协议的制定、串口收发数据的功能，最大8通道的数据曲线实时显示，时间区间的实时调节。☆32Updated 7 years ago
- simple qt application that compute Real Time (Real) FFT of Data coming From Serial Port, and Plot Both Raw Data and FFT using QcustomPlot…☆23Updated 10 years ago
- 基于Qt开发的PID波形显示，参数整定辅助工具☆13Updated 6 years ago
- 开源示波器☆46Updated 5 years ago
- 1、实时解析串口数据并绘制相关曲线 | 2、串口单独一个进程（不影响GUI刷新) | 3、曲线、串口参数可配置、可保存☆84Updated 6 years ago
- Central control upper computer, used to control the motor, monitoring the motor running state of the data. The code mainly realizes UART …☆16Updated 4 years ago
- UniSwarm Tools for UDT interface and CANOpen in Qt5/6☆31Updated 6 months ago
- Embedded Linux App with Qt for GPIO using☆12Updated 8 years ago
- Qt cross-platform serial port socket assistant for visualizing data. Qt编写的串行数据解析与可视化工具，支持串口与TCP，UDP等串行数据流。☆168Updated last month
- 基于Qt5的简单串口助手☆13Updated 5 years ago
- 基于 Qt 的机械臂操作系统 —— Arduino、四轴桌面电动机械臂、Qt 开发上位机、USB 串口通信☆13Updated 3 years ago
- Qt Quick 3D的一些示例程序☆29Updated 3 years ago
- 基于QT的串口通信的虚拟飞行器仪表☆13Updated 7 years ago
- 本信号处理板主要由FPGA芯片和CYUSB3.0 芯片组成,其中FPGA模块主要完成与相关外设的交互，CYUSB3.0主要完成协议数据的传输。 2.2.1 FPGA模块 处理流程： 1. 链路初始化： 在上位机完成USB固件的下载，并读取…☆29Updated 10 years ago
- 基于uFUN开发板的RGB调色器，包含STM32程序，Qt串口上位机源码及安装包。☆12Updated 6 years ago
- 利用扩展卡尔曼滤波进行姿态解算☆14Updated 10 years ago
- Qt/QCustomPlot Data Viewer☆16Updated 9 years ago
- Real-time serial plotter written in Qt6 and QCustomPlot☆15Updated 2 years ago
- Qt ，C++，化学发光仪上位机☆12Updated 7 years ago