Jartza / PS2toAmigaLinks
Simple ATTiny85 based PS/2 to Amiga protocol converter that fits inside the keyboard.
☆15Updated 3 years ago
Alternatives and similar repositories for PS2toAmiga
Users that are interested in PS2toAmiga are comparing it to the libraries listed below
Sorting:
- MOS 6520 PIA / MOS 6522 VIA / MOS 6526/8520/8521 CIA replacement☆37Updated 2 months ago
- Amiga 500 8MB FastRAM and IDE interface☆34Updated 10 months ago
- Adapter to fit the older 1MB Agnus to the A500+☆18Updated 3 years ago
- A Gotek based compact PCB for Amiga☆44Updated last year
- A1000 Rejuvenator☆51Updated last year
- Use USB input devices on Amiga computers, using the excellent Raspberry Pi Pico as a USB-to-bitbang adapter.☆53Updated 10 months ago
- Amiga 1200 keyboard MPU drop-in replacement pcb☆37Updated last year
- SRAM substitute for C64C shortboards☆58Updated 7 years ago
- An Open source IDE driver for Amiga computers☆32Updated 2 weeks ago
- SDBox-v2 for Amiga, compatible with the new updated card-detect firmware☆47Updated 3 years ago
- A lower RAM module for the ZX Spectrum☆21Updated 2 years ago
- The Ultimate Amiga RGB to VGA filtered buffered let-those.ugly-barrels-away adapter☆28Updated 2 months ago
- CPLD Replacement for A2000 Buster☆70Updated last year
- ☆27Updated 2 years ago
- A replica of the Prelude ZII sound card for the Amiga.☆34Updated last year
- A replacement PCB for the C64 Wedge PSU☆17Updated 9 months ago
- Replace the old 44256 DRAM chips on your A500 with newer SRAM memory☆3Updated 5 years ago
- Adapter to allow the use of the A500+/A600 Agnus (390544 8375 ) in an Amiga A3000☆17Updated 2 years ago
- SPI adapter that connects to the parallel port of an Amiga☆47Updated 2 weeks ago
- A knockoff of the A1050 front mounted RAM Expansion for the Amiga 1000☆12Updated last year
- Fancy Kickstart Switcher for A500-A600-A1200-A4000☆18Updated 8 months ago
- An easier to solder version of the Lumafix board, components spaced out a bit more to make things easier on the beginner (mostly meaning …☆37Updated 5 years ago
- ☆25Updated 4 months ago
- A PLCC-84 plug adapter created out of PCBs☆26Updated 9 months ago
- single 12V Power supply module for Amiga 500 computers☆29Updated 3 years ago
- 8MB FastRAM and BSC-AT-Bus IDE controller for Amiga 500☆26Updated 10 months ago
- ReAmiga 3000TH by John 'Chucky' Hertell converted to KiCAD☆20Updated 4 years ago
- Terriblefire TF1230☆28Updated 3 years ago
- Improved design attempt for Amiga 500 in socket 68000 Accelerator, FastRAM and IDE Interface☆53Updated 10 months ago
- Wifi adapter for the Amiga clockport☆33Updated last year