Alternatives and similar repositories for modbus-herdsman-converters

Users that are interested in modbus-herdsman-converters are comparing it to the libraries listed below

• Instathings / modbus2mqtt
  Modbus 🚌 to MQTT bridge 🌉
  ☆44Updated 2 years ago
• openenergymonitor / ESP8266_Relay_Board
  1CH MQTT WiFi Relay/Thermostat Board
  ☆31Updated 2 years ago
• BlackZork / mqmgateway
  MQTT gateway for modbus networks
  ☆77Updated last week
• tjhowse / modbus4mqtt
  Modbus TCP <-> MQTT glue. YAML configuration. Robust.
  ☆90Updated 3 weeks ago
• ralphwetzel / node-red-mcu-plugin
  Plugin to support the Node-RED implementation for microcontrollers
  ☆37Updated 4 months ago
• openenergymonitor / HeatpumpMonitor
  Open-source Heatpump Monitor
  ☆77Updated last year
• GermanBluefox / node-red-vis
  Web visualisation for node-red.
  ☆15Updated 8 years ago
• gmasse / esp-modbus-mqtt
  A Modbus RTU (RS-485) to MQTT Gateway (based on ESP32)
  ☆93Updated last year
• bonjour81 / station_meteo
  Weewx homemade weather station, with MQTT, ESP8266 and nice sensors
  ☆16Updated last year
• budulinek / arduino-modbus-rtu-tcp-gateway
  Arduino-based Modbus RTU to Modbus TCP/UDP gateway with web interface. Allows you to connect Modbus RTU slaves (such as sensors, energy m…
  ☆201Updated 8 months ago
• chaveiro / EmonLibPro
  Generic library for any voltage and current sensors. Interrupt based, implements a zero cross detector and phase-locked loop for better p…
  ☆27Updated 9 years ago
• ascillato / Tasmota_KNX
  Alternative Firmware for 'ESP8266, ESP8285 and ESP32 based devices' like Itead Sonoff, Shelly or NodeMCU, with Web, Timers, OTA, MQTT, KN…
  ☆47Updated last year
• OLIMEX / ESP32-POE-ISO
  ESP32 Power Over Ethernet board with 3000VDC Galvanic insulation
  ☆124Updated 2 months ago
• petkov / http_to_mqtt
  HTTP to MQTT bridge
  ☆90Updated last year
• alerighi / modbus-sniffer
  A sniffer for the modbus protocol
  ☆62Updated last year
• SequentMicrosystems / megaind-rpi
  Command Line, Python, and Node-Red for Industrial Automation Card
  ☆23Updated 3 months ago
• thelsing / CreateKnxProd
  Simple Gui to create simple knxprod file for ETS.
  ☆60Updated 3 years ago
• colinl / node-red-contrib-pid
  A node-red PID loop controller node intended for the control of real world processes
  ☆28Updated last year
• GoWired / GoWired-Project
  Automate your home with GoWired open source modules designed for wired communication.
  ☆41Updated 2 years ago
• node-red-contrib-themes / theme-collection
  A collection of themes for Node-RED
  ☆104Updated this week
• smartboxchannel / EFEKTA_E73C_PWS_MODULE
  ☆55Updated last year
• codm / cc2652p2-tcp-zigbee
  ZigBee CC2652P2 Ethernet Coordinator
  ☆33Updated last month
• gianfrdp / SDM120C
  sdm120c ModBus Mini Smart Meter
  ☆73Updated 4 years ago
• Rafelder / knx-datapoints
  Encode and decode knx datapoints
  ☆24Updated 2 years ago
• linknx / linknx
  Linknx is a service aimed at interacting with KNX devices. It features a value cache to save bus bandwidth and exposes a rules engine all…
  ☆50Updated 4 months ago
• kbickar / IoT
  Code for varios IoT devices
  ☆65Updated 6 years ago
• nuclearcat / ESP32ETH
  Simple ESP32 with native ethernet using LAN8720 phy, Arduino compatible
  ☆29Updated 3 years ago
• apreb / shellyEMmockup
  base code for shelly EM energy meter
  ☆10Updated 5 years ago
• hobbyquaker / mqtt-scripts
  Node.js based script runner for use in MQTT based Smart Home environments
  ☆62Updated 4 years ago
• softwarecrash / EPEver2MQTT
  ESP82XX based connector for EPEver Solar tracker systems, control and watch Multiple devices over webinterface and MQTT
  ☆60Updated 3 months ago