Alternatives and similar repositories for modbus2mqtt:

Users that are interested in modbus2mqtt are comparing it to the libraries listed below

• Instathings / modbus-herdsman-converters
  Collection of Modbus device converters 🐑
  ☆11Updated last year
• tjhowse / modbus4mqtt
  Modbus TCP <-> MQTT glue. YAML configuration. Robust.
  ☆84Updated 9 months ago
• volkszaehler / mbmd
  ModBus Measurement Daemon - simple reading of data from ModBus meters and grid inverters
  ☆248Updated last month
• owagner / modbus2mqtt
  Modbus master which publishes via MQTT
  ☆127Updated last year
• BlackZork / mqmgateway
  MQTT gateway for modbus networks
  ☆59Updated last week
• mbs38 / spicierModbus2mqtt
  Modbus master which publishes via MQTT
  ☆63Updated last month
• atlewee / node-red-contrib-knx-easy
  Use KNX just like the mqtt nodes
  ☆20Updated 5 years ago
• owagner / knx2mqtt
  Gateway between KNX bus interfaces and MQTT
  ☆46Updated 9 years ago
• tiagocoutinho / modbus-proxy
  Connect multiple clients to modbus devices
  ☆87Updated 3 weeks ago
• OpenKNX / OpenKNX
  OpenSource KNX software and hardware for maker, hobbyist and home automation enthusiasts
  ☆73Updated 2 months ago
• pakerfeldt / knx-mqtt-bridge
  ☆39Updated 3 weeks ago
• RalfOGit / libspeedwire
  SMA Speedwire(TM) access library written in C++
  ☆16Updated last month
• BiancoRoyal / node-red-contrib-bacnet
  maintained by PLUS for Node-RED - https://plus4nodered.com
  ☆27Updated 7 months ago
• budulinek / arduino-altherma-controller
  Arduino-based controller for Daikin Altherma heat pumps. The controller connect to the Altherma heat pump via P1/P2 bus, has a built-in w…
  ☆57Updated 2 weeks ago
• gmasse / esp-modbus-mqtt
  A Modbus RTU (RS-485) to MQTT Gateway (based on ESP32)
  ☆87Updated 10 months ago
• nmakel / sdm_modbus
  Eastron SDM Modbus data collection library
  ☆47Updated last month
• KARDUINO / SignKnxProd
  Source to build an own .knxprod sign-tool
  ☆13Updated 9 years ago
• 2pk03 / bacnet-mqtt-gateway
  BACnet MQTT Gateway
  ☆51Updated 2 months ago
• mumpf / knx-sensor
  PlatformIO: implements a knx-sensor firmware for a SAMD21 board
  ☆11Updated 3 years ago
• tobiasfaust / SolaxModbusGateway
  Modbus RTU to MQTT Gateway
  ☆81Updated this week
• budulinek / arduino-modbus-rtu-tcp-gateway
  Arduino-based Modbus RTU to Modbus TCP/UDP gateway with web interface. Allows you to connect Modbus RTU slaves (such as sensors, energy m…
  ☆182Updated 2 weeks ago
• MichielVanwelsenaere / HomeAutomation.CoDeSys3
  Home Automation system build in CoDeSys 3 with MQTT communication to any third party Home Automation software
  ☆120Updated 3 months ago
• gavinying / modpoll
  A New Command-line Tool for Modbus and MQTT
  ☆109Updated last week
• nmakel / solaredge_meterproxy
  Modbus proxy for SolarEdge inverters and unsupported kWh meters
  ☆33Updated 10 months ago
• dgomes / dali2mqtt
  DALI <-> MQTT bridge
  ☆47Updated last year
• gonium / gosdm630
  An interface for the Eastron SDM/Modbus smart meter series.
  ☆73Updated 5 years ago
• WAGO / pfc-firmware
  This repository contains official Wago firmware releases for 750-8xxx(PFC) series.
  ☆46Updated last year
• thelsing / CreateKnxProd
  Simple Gui to create simple knxprod file for ETS.
  ☆60Updated 2 years ago
• minix1234 / hacore_opcua
  opcua custom component for home assistant
  ☆11Updated 3 years ago
• martin-doyle / node-red-contrib-aedes
  MQTT broker for Node-RED based on Aedes
  ☆63Updated 7 months ago