Ingramz / ecl110

Related projects: ⓘ

• aviborg / ecl110
  MODBUS protocol for Danfoss ECL Comfort 110
  ☆10Updated 7 months ago
• aviborg / esp-smart-meter
  A reliable ESP8266 application to read out data from (swedish) COSEM/DLMS based smart meters using OBIS code/structure.
  ☆46Updated 4 months ago
• elupus / esphome-nibe
  Esphome components for nibe heat pumps
  ☆62Updated 3 weeks ago
• nmakel / solaredge_meterproxy
  Modbus proxy for SolarEdge inverters and unsupported kWh meters
  ☆30Updated 4 months ago
• Hal9k-dk / kamstrup
  Kamstrup IR-øje
  ☆16Updated last year
• erikarenhill / solaredge-modbus-hass
  A custom platform component/sensor for reading SolarEdge Modbus TCP into Home Assistant https://home-assistant.io/
  ☆94Updated 8 months ago
• bebben88 / NibePi
  ☆81Updated 3 years ago
• ghoti57 / evofw3
  Major overhaul of evofw2 Evohome listening software to use asynchronous radio mode
  ☆60Updated last month
• eelcohn / nRF905-API
  API webinterface for the nRF905
  ☆66Updated 2 months ago
• rvdbreemen / OTGW-firmware
  A ESP8266 devkit firmware for the Nodoshop version of the Opentherm Gateway (OTGW)
  ☆146Updated last month
• nmakel / solaredge_modbus
  SolarEdge Modbus data collection library
  ☆146Updated last month
• remne / p1ib
  P1 Interface Bridge
  ☆58Updated last week
• toreamun / amshan-homeassistant
  Home Assistant integrasjon for strømmålere (AMS/HAN/P1). Integrasjonen støter både streaming (serieport/TCP-IP) og MQTT (Tibber Pulse, en…
  ☆147Updated 8 months ago
• jantenhove / GoodWeLogger
  ESP8266 based logger for GoodWe inverters. Can upload to pvoutput and publishes MQTT topics
  ☆98Updated last year
• chester4444 / esp-multical21
  ESP8266/ESP32 decrypts wireless MBus frames from a Multical21 water meter
  ☆83Updated 9 months ago
• kotope / ha_nordpool_cheapest_hours
  Home Assistant package to calculate cheapest hours using Nordpool integration
  ☆61Updated 7 months ago
• skagmo / meter_reading
  ☆21Updated 5 years ago
• jagheterfredrik / wallbox-mqtt-bridge
  MQTT Bridge enables fully local, cloud-free, control of your Wallbox Pulsar Plus and Copper SB
  ☆23Updated this week
• ryanalden / esphome-jura-component
  Custom component for ESPhome to communicate with Jura Impressa J6 coffee machines
  ☆71Updated 4 years ago
• rogersia / Solis-4G
  Python project to Read Solis-4G inverter over RS485
  ☆15Updated 6 years ago
• dannerph / homeassistant-solcast
  ☆19Updated 2 years ago
• turbokongen / hass-AMS
  Custom component reading AMS through MBus adapter into HomeAssistant
  ☆44Updated 4 months ago
• planetmarshall / solis-service
  Server for decoding and persisting data from a Solis PV inverter
  ☆18Updated 3 years ago
• budulinek / arduino-altherma-controller
  Arduino-based controller for Daikin Altherma heat pumps. The controller connect to the Altherma heat pump via P1/P2 bus, has a built-in w…
  ☆48Updated 7 months ago
• m000c400 / Mitsubishi-CN105-Protocol-Decode
  Documentaion of Mitsubishi CN105 Protocol of Ecodan Air Source Heat Pumps
  ☆57Updated last month
• BartGijsbers / CN105Gateway
  ESP32 based MQTT gateway for the CN105 protocol based Mitsubishi Heat Pumps (FTC5)
  ☆26Updated 2 years ago
• bachya / ecowitt2mqtt
  Send data from Fine Offset weather stations (Ecowitt, Ambient Weather, Froggit, etc.) to MQTT!
  ☆210Updated this week
• MatterVN / ModbusTCP2MQTT
  Sungrow & SMA Solar Inverter addon for Home Assistant using mobusTCP
  ☆68Updated 3 months ago
• volkszaehler / mbmd
  ModBus Measurement Daemon - simple reading of data from ModBus meters and grid inverters
  ☆231Updated last month
• psvanstrom / esphome-p1reader
  ESPHome custom component for reading P1 data from electricity meters.
  ☆262Updated 2 months ago