InfernoEmbedded / PowerScraperLinks
A scraper for power devices to feed data to OpenEnergyMonitor
☆35Updated 3 months ago
Alternatives and similar repositories for PowerScraper
Users that are interested in PowerScraper are comparing it to the libraries listed below
Sorting:
- An M-bus master that poll a meter and logs data to an MQTT server☆52Updated 9 years ago
- ESP8266 based logger for GoodWe inverters. Can upload to pvoutput and publishes MQTT topics☆96Updated last year
- ☆15Updated 7 years ago
- Readout of EMS protocol datagrams and transfer of data to Domoticz via Arduino☆90Updated 4 years ago
- Venus OS service mapping the D-Bus on Venus OS to MQTT☆114Updated last year
- Brings EVSE WB/DIN into your WiFi☆81Updated 2 years ago
- Communicate with Viessmann boilers using the optolink for ESP8266 and ESP32☆130Updated last month
- An interface for the Eastron SDM/Modbus smart meter series.☆74Updated 6 years ago
- Read data from victron mppt and transport to mqtt server☆42Updated 2 years ago
- Documentaion of Mitsubishi CN105 Protocol of Ecodan Air Source Heat Pumps☆69Updated 10 months ago
- Growatt Inverter monitoring via MQTT using ESP8266 modbus interface☆67Updated 5 years ago
- A Python API to parse Victron Instant Readout BLE advertisements☆140Updated 3 months ago
- Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485☆78Updated last year
- Collect from SMA RS485 Inverters and send the data to your cloud using Ardexa☆30Updated 4 years ago
- Code to read the VE.Direct-Protocol from serial into a value array. Uses a non-blocking read loop and does checksum verification before a…☆129Updated 3 years ago
- sdm120c ModBus Mini Smart Meter☆73Updated 4 years ago
- A node-red PID loop controller node intended for the control of real world processes☆27Updated last year
- A node red based dashboard for most EPEver/EPSolar solar charge controllers.☆68Updated last year
- Arduino library for interfacing with Dutch smart meters implementing DSMR☆139Updated last year
- Control the Itho Daalderop Eco Fan RFT using a microcontroller and CC1101 chip. The original code is fully tested using a STK500 and ATMe…☆54Updated last year
- An arduino sketch to connect the EPSolar/EPEver Tracer A/B Series (RS-485 Modbus) to an ESP8266 and monitor using the Blynk mobile app.☆65Updated 6 years ago
- ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter☆89Updated last week
- solar serial inverter system☆33Updated 2 years ago
- MQTT 433.92 MHz radio-frequency device gateway☆137Updated 2 years ago
- ESP8266 WiFi for OpenEVSE Version 2.x☆78Updated 6 months ago
- Adding WiFi monitoring to US2000B and US2000C batteries.☆147Updated 2 years ago
- ☆114Updated last week
- EPSolar Solar Charge Controller to MQTT☆43Updated 3 years ago
- Logger for the PIP Inverter series ( USB / RS232 version )☆95Updated last year
- A datalogger for a solar inverter. Stores data in influxdb and displays it in grafana. Has load diverting capability, to use the inverter…☆106Updated 2 years ago