Glinnes / NMEAParser
A simple and compact NMEA parser for Arduino
☆15Updated 3 years ago
Alternatives and similar repositories for NMEAParser:
Users that are interested in NMEAParser are comparing it to the libraries listed below
- This repository shows how to use the M5Stack as NMEA 2000 Display and WiFi Gateway.☆38Updated 3 years ago
- Sailor Hat for ESP32 hardware☆45Updated 5 months ago
- Arduino port of the dAISy AIS project for si446x☆17Updated 6 years ago
- To measure temperature and barometric pressure with a BMP280 sensor and send it to NMEA2000 network.☆14Updated 2 years ago
- Remote Control for an Evolution EV-1 Auto Pilot via NMEA2000/SeatalkNG.☆21Updated 3 years ago
- Digital compass acting as B&G Precision 9 based on ESP32 and CMPS14☆18Updated 7 months ago
- Inherited object for use NMEA2000 with ESP32 boards☆75Updated 7 months ago
- nmea2000 gateway with ESP32☆74Updated 3 weeks ago
- This is the develoment space for a NMEA 2000 Voyage Data Recorder based on an ESP32 with CAN bus and SD card. The logger is using a SN65H…☆26Updated 3 years ago
- An Actisense NGT-1 compatible NMEA 2000 USB gateway for the SH-ESP32☆31Updated last year
- This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.☆76Updated 3 years ago
- OGN Tracker implementation on ESP32 devices☆59Updated last year
- A compact Arduino library to parse NMEA sentences.☆99Updated 2 years ago
- Universal wireless communication shield for Arduino☆42Updated 5 years ago
- AIS Encoder Add-On for NMEA2000/NMEA0183 Library of Timo Lappalainen☆11Updated last year
- Using an ESP32 and OLED with a basic microphone to decode Morse Code live to the display☆55Updated 2 years ago
- An external Buzzer for NMEA2000 / SeaTalk-NG Alarms.☆14Updated last year
- Reads NMEA0183 messages from two serial lines and forwards multiplexed messages to USB-Serial and WLAN as UDP broadcast.☆11Updated 2 years ago
- datasheet and Arduino demo code for LoRa Radio Node v1.0☆48Updated 6 years ago
- To measure battery voltage, engine RPM, fuel level and exhaust teperature with an ESP32 and send it to a NMEA 2000 network.☆56Updated 3 years ago
- APRS with DRA818 module☆29Updated 2 years ago
- An Arduino library able to decode AIS messages☆30Updated last year
- ESP32-based LoRa ground station☆30Updated 4 years ago
- DIY-Windsensor based on an ESP8266 with 3D printed enclosure☆12Updated 3 years ago
- ☆11Updated 10 months ago
- This repository shows how to build a Seatalk Autopilot Remote Control device based on an Arduino ProMicro and a simple 433 MHz KeyFob.☆65Updated last year
- ☆37Updated 2 years ago
- Open-source electronics for your boat☆47Updated 4 years ago
- An ESP8266 based Gateway for sending LORA transmissions to the Habitat high altitude balloon tracking system.☆26Updated 6 years ago
- Pinout TTGO-LoRa32-V2.1-T3_V1.6☆17Updated 4 years ago