Alternatives and similar repositories for laserengraver:

Users that are interested in laserengraver are comparing it to the libraries listed below

• villamany / 3dpBurner-Image2Gcode
  3dpBurner Image2Gcode. A Image to GCODE converter for GRBL based devices
  ☆56Updated 5 years ago
• synthetos / grblShield
  ☆134Updated 11 years ago
• cody82 / grblgui
  GUI for grbl.
  ☆51Updated 7 years ago
• villamany / 3dpBurner-sender
  A GCODE sender for the 3dpBurner laser cutter/engraver (GRBL based)
  ☆36Updated 7 years ago
• unicornswag / Universal-CNC-Controller
  Simple *nix CLI for grbl and Other ATmega Firmwares
  ☆17Updated 11 years ago
• bobc / bobc_hardware
  Various hardware projects
  ☆86Updated 7 years ago
• bkubicek / QTMarlin
  QT Marlin setting configuration tool
  ☆77Updated 8 years ago
• beardface / Marlin-OpenSL
  Reprap FW with look ahead. SDcard and LCD support. It works on Gen6, Ultimaker, RAMPS and Sanguinololu
  ☆16Updated 11 years ago
• SourceRabbit / gcode-sender
  Cross platform 3-Axis CNC Machines control software
  ☆80Updated 6 months ago
• bdring / Grbl_ESP32_TMC2130_Plotter_Controller
  ☆66Updated 5 years ago
• gnea / grbl-LPC
  ☆74Updated 3 years ago
• pistolero / chilipeppr-offline
  Node-webkit based Chilipeppr wrapper
  ☆29Updated 9 years ago
• fastbot3d / firmware
  ☆11Updated 8 years ago
• shapeoko / Shapeoko_2
  Shapeoko v2 Official Release
  ☆117Updated 11 years ago
• Smoothieware / Smoothie2-old
  (Deprecated attempt at) A Smoothie firmware port to the Smoothieboard v2 boards.
  ☆34Updated 7 years ago
• LibreScanner / horus-fw
  Horus firmware for 3D Scanner Ciclop
  ☆70Updated 8 years ago
• gnea / gnea
  An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on a straight Ar…
  ☆41Updated 11 years ago
• zelogik / AluXY
  A ful metal CoreXY system for 3D printer, mill etc..
  ☆47Updated 11 years ago
• uStepper / uStepper
  Repository for uStepper
  ☆98Updated 5 years ago
• utlco / tcnc
  Inkscape extension that generates G-code suitable for a 3.5/4 axis CNC machine (XYZ plus tangent A)
  ☆26Updated 11 months ago
• OttoHermansson / GcodeSender
  A simple program för transfering gcode to Grbl. I started this to have a easy control program for my pocket laser engraver (http://www.in…
  ☆70Updated 14 years ago
• clementleger / Smoothieware-STM32
  [DEPRECATED] Modular, opensource, high performance G-code interpreter and CNC controller written in Object-Oriented C++
  ☆38Updated 9 years ago
• ttsalo / Marlin-SCARA
  Modified Marlin for parallel SCARA printers.
  ☆21Updated 12 years ago
• cho45 / GrblServer
  ☆64Updated 9 years ago
• beckdac / SCARA
  Ultra low cost 3D printable SCARA arm
  ☆19Updated 9 years ago
• bitboxelectronics / R2C2_Firmware
  R2C2 -- electronics for RepRap 3D printers (and others), CNC and other machines.
  ☆35Updated 4 years ago
• evezor / Cartesian-to-SCARA-Converter
  This script will convert gcode from cartesian space to SCARA space
  ☆29Updated 7 years ago
• martymcguire / inkscape-unicorn
  Inkscape extension for outputting G-Code for the MakerBot Unicorn Pen Plotter
  ☆177Updated 7 years ago
• uStepper / uStepper-RobotArm-Rev3
  uStepper Robot Arm STL files and instruction Revision 3
  ☆88Updated 7 years ago
• bdring / Grbl_ESP32_Development_Controller
  A CNC controller to use and test Grbl_ESP32
  ☆76Updated 4 years ago