CBrunsch / WMBus-Sniffer-MUCLinks
Source code of the demonstration programs showed in the Black Hat '13 presentation "Energy fraud and orchestrated blackouts: Issues with wireless metering protocols (WM-BUS)" by Cyrill Brunschwiler
☆32Updated 12 years ago
Alternatives and similar repositories for WMBus-Sniffer-MUC
Users that are interested in WMBus-Sniffer-MUC are comparing it to the libraries listed below
Sorting:
- Receiver for wireless m-bus (EN 13757-4) based on the rtl-sdr☆28Updated 10 years ago
- Scambus is a python based wireless M-Bus scanner and dissector☆31Updated 7 years ago
- IEEE 802.15.4 monitor based on TI CC2531 USB dongles☆75Updated 9 years ago
- reading dumbmeters with gnuradio☆46Updated 10 years ago
- Whsniff is a command line utility that interfaces TI CC2531 USB dongle with Wireshark for capturing and displaying IEEE 802.15.4 traffic …☆139Updated last year
- ccsniffpiper☆94Updated 3 years ago
- Receiver for wireless m-bus (EN 13757-4) based on the rtl-sdr☆35Updated 10 years ago
- CDM324 Amplification Backpack, With Case and Simulations☆61Updated 8 years ago
- Python 802.15.4 packet sniffer for the CC2531 EMK from Texas Instruments☆88Updated 3 years ago
- G.9959(ZWave) demodulator☆62Updated 2 years ago
- Scans LoRa channels displaying any monitored packets on the TFT display☆92Updated 8 years ago
- Hardware for an ESP8266 or Arduino based AC power meter using the Atmel 90E24 energy management chip☆53Updated 10 years ago
- simplified rewrite of http://yveaux.blogspot.com/2014/07/nrf24l01-sniffer-part-1.html using only a raspberry pi and a nRF24L01+ module☆24Updated 8 years ago
- Utility for reading EnergyTrace data from TI debug hardware☆38Updated 4 years ago
- A quad USB-to-serial breakout board based on the FT4232 IC☆15Updated 7 years ago
- Raspberry PI Lora Gateway/Node for HopeRF RFM95 RFM96 RFM98 Modules☆135Updated 7 years ago
- A command-line tool to control 433MHz OOK based devices☆42Updated 6 years ago
- nordic semiconductor wireless chipsets related code☆43Updated 11 years ago
- Use rtl-sdr to receive EnergyCount 3000 transmissions☆18Updated 9 years ago
- Library for the Dangerous Prototypes Bus Pirate☆40Updated 3 years ago
- Python only library to scan and decode advertised BLE info. Uses asyncio. Can decode Ruuvi Tag. Can broadcast EddyStone packets.☆129Updated last year
- Ook-decoder reads On-Off Keying radio data commonly used in the 433MHz ISM bands using a software defined radio (SDR).☆153Updated 4 years ago
- MicroPython - a lean and efficient Python implementation for microcontrollers and constrained systems☆34Updated last year
- rdserialtool - RDTech UM/DPS/RD series device interface tool☆99Updated 3 years ago
- Example of using an Arduino and a nRF24L01+ to fake BLE advertisement☆69Updated 11 years ago
- Repository containing my Verisure Wireless alarm scripts☆59Updated 11 years ago
- MicroPython IEEE802.15.4 / Zigbee parser☆51Updated 5 years ago
- Qt assistant for Rigol DS1000 series scopes☆134Updated 5 years ago
- A Bluetooth LE sniffer for CC2540 USB dongle and Mac.☆40Updated 9 years ago
- Sniffer for Nordic NRF24L01+ modules with MySensors support☆160Updated 9 months ago