Alternatives and similar repositories for 2.0.x-SapphirePro-BLTouch:

Users that are interested in 2.0.x-SapphirePro-BLTouch are comparing it to the libraries listed below

• inib / Marlin
  This marlin fork is used to keep track of the configs of my printers - use at own risk and check the wiki - if you have questions feel fr…
  ☆44Updated last year
• CODeRUS / klipper_config
  ☆28Updated 10 months ago
• VICLER / Moli-Extruder
  The most lightweight BMG dual drive filament extruder
  ☆45Updated 2 years ago
• pavluchenkor / iDryerController
  ☆37Updated last month
• willngton / 3DPrinterConfig
  My 3D Printers Configuration backup - Marlin and Klipper
  ☆44Updated 2 years ago
• armysolo / BLV-Cube
  Mods for BLV Cube
  ☆41Updated 2 years ago
• makerbase-mks / MKS-WIFI
  MKS TFT WIFI and MKS ROBIN WIFI , share the same firmware. Support MKS Robin series board and MKS TFT series board, for cloud printing an…
  ☆95Updated 3 years ago
• dmitry-sorkin / BeMeGe
  BeMeGe extruder is BMG reverse, optimized for 3d printing
  ☆59Updated last year
• dmitry-sorkin / k3d-minifeeder
  Miniature LGX Lite - compatible 3D printer feeder
  ☆26Updated 2 years ago
• CODeRUS / klipper_extras
  Extras
  ☆18Updated last year
• MirageC79 / FilamentDryer_Controller
  Arduino OLED Rlelay and DS18B20 to control heater element of a 3D printing Filament dryer.
  ☆36Updated 4 years ago
• silver-alx / sbc
  Popular SBC linux images
  ☆28Updated last month
• GadgetAngel / BTT_SKR_13_14_14T_SD-DFU-Bootloader
  This is a repository of BIGTREETECH bootloaders. The originals are stored under the bootloader_bin/backed_up_original_bootloaders/ direc…
  ☆129Updated 2 years ago
• CroXY3D / Sailfin-Extruder
  A lightweight compact extruder with 5:1 gearing using BMG dual drive
  ☆234Updated 2 years ago
• naruhaxor / AndroidKlipperScreen
  a simple writeup /installer script to use android Devices and a UI for KlipperScreen for RaspberryPI
  ☆121Updated last year
• le3tspeak / Marlin-2.0.X-MKS-Robin-Nano
  Marlin 2.0.X for the MKS Robin Nano 1.1/1.2
  ☆107Updated 4 years ago
• freakydude / klipper-serial-btt
  This is my project to enable serial (UART) connected BigTreeTech-TouchScreens with Klipper by emulating anything it needs with macros.
  ☆28Updated last month
• manu7irl / klipper-DWC2-installer
  to streamline the install or upgrade of KLIPPER & DWC2 front-end for it. With these 2 together no need to use octoprint. I run mine on or…
  ☆55Updated 4 years ago
• The--Captain / plr-klipper
  Power Loss Recovery for Klipper
  ☆83Updated last year
• ChipCE / Slicer-profile
  Slicer profile for cutom build printer
  ☆20Updated last year
• ArtificalSUN / MKS-WIFI_PS_uploader
  Simple G-code file uploader for 3D-printers equipped with MKS-WIFI module
  ☆55Updated last year
• makerbase-mks / MKS-Robin-Nano-V1.X
  MKS Robin Nano is a powerful 32-bit 3D printer control board with STM32F103VET6. Support Marlin2.0. Support MKS Robin TFT24/28/32/35/43 t…
  ☆202Updated 3 years ago
• VzBoT3D / Vz-Printhead-Printed
  Printed version of the Vz-Printhead
  ☆135Updated last month
• fbeltrao-br / mksts35
  ☆70Updated last year
• jjsch-dev / filament_dryer_rp2040
  Heats and dries wet filaments to improve print quality and longevity.
  ☆19Updated last year
• makerbase-mks / MKS-Robin-Nano-V3.X
  Robin nano V3 is an upgraded version of Robin Nano V2.0. The upgrade changes are quite large, including upgrading the MCU to the M4 core,…
  ☆149Updated last year
• vyacheslav-shubin / shui
  MKS-ROBIN_NANO, MKS-WIFI shui firmware
  ☆98Updated 3 weeks ago
• ThatGuyHes / Dual-Extruder-X4
  Dual Extruder X4: Nothing like the last one.
  ☆28Updated 6 months ago
• Sergey1560 / fb4s_howto
  Howto
  ☆78Updated last year
• d4rk50ul1 / klipper-on-android
  Using Android to run Klipper, Moonraker, Mainsail/Fuidd, and KlipperScreen
  ☆123Updated last year