zhaohengbo / rt-bootLinks
A New Designed Multi-Thread Bootloader
☆109Updated 6 years ago
Alternatives and similar repositories for rt-boot
Users that are interested in rt-boot are comparing it to the libraries listed below
Sorting:
- A real-time based uboot☆132Updated last year
- uboot for mt76x8,Default console:115200,8,n,1,UART0,The web on ETH0☆91Updated 2 years ago
- A SPI-NAND flash programmer botched together using kernel SPI-NAND framework. Works with stm32-vserprog or WCH CH347.☆55Updated 2 years ago
- Simple CH341 SPI Programmer / 简易 CH341 SPI 编程器☆30Updated 8 years ago
- OpBoot for Widora(MT7688)☆45Updated 5 years ago
- ☆16Updated 3 months ago
- A bootloader that allows MT7621 to boot directly from Micron SPI-NAND☆59Updated 5 years ago
- Based OpenWrt cc15.05, Only for widora BIT3 3.1 4 5 5.1 and NEO☆176Updated 3 months ago
- uboot openwrt package for mt7628☆49Updated 10 years ago
- openwrt for sigmastar SSD201/SSD202☆69Updated 3 years ago
- OpenOCD configuration for MT7688AN/MT7688KN/MT7628x☆38Updated 7 years ago
- u-boot for mt7620 with uip.☆67Updated 11 years ago
- "Das U-Boot" Source Tree☆136Updated 2 years ago
- ☆34Updated 6 years ago
- MCU programmer for J-LINK and DAPLink, using Keil MDK's *.FLM Flashing Algorithm☆175Updated 3 months ago
- electronic waste collection. 数码视讯 Q5, 泰奇猫 TQC-A01, 贝壳云 Beikeyun P1, 网心云 OEC Turbo, 外贸盒子 A5X Max,FMX1 电视盒子, 保千里 SC150MBN1 汽车夜视系统图传, 云盒 …☆69Updated 5 months ago
- ☆13Updated 5 years ago
- ☆50Updated 4 months ago
- C8T6核心板JLINK固件(FW:J-Link STLink V2 compiled Jun 26 2017 1041)☆86Updated 3 years ago
- ☆75Updated 7 years ago
- Universal Flash Programmer☆96Updated last year
- nuc972 for RT-Thread 3.0☆27Updated 8 years ago
- The firmware downloader which using on RT-Thread OTA component.☆71Updated 2 years ago
- 新内核,新引导,新文件系统,纯粹爱好,不定期维护.适配EasyARM-i.MX283A.☆24Updated 5 years ago
- Simple general-purpose embedded system code coverage test tool☆47Updated 7 years ago
- Linux 4.4 Kernel Source Code for NUC980 Series Microprocessor☆49Updated 5 months ago
- extract all firmware from JLink software package☆39Updated 9 months ago
- IoT networking utilities for RT-Thread. Such as: ping, tftp, iperf, netio, ntp, telnet and tcpdump.☆83Updated 5 months ago
- hack boyun☆98Updated 5 years ago
- MCUProg is a MUC programming host computer software based on pyocd+PySide6☆41Updated last month