Alternatives and similar repositories for MotionControl

Users that are interested in MotionControl are comparing it to the libraries listed below

• lynnllh / 3PRRGUI
  基于Qt开发环境，开发运用于双并联机器人的人机交互软件，实现控制器参数配置，编码器数据的实时反馈，并联机器人的参数设置、基于点位运动模式进行电机位置控制，多线程控制6个电机
  ☆22Updated 6 years ago
• alexlee1982 / douleS_trajectory_plan
  用matlab与C代码实现S曲线加减速
  ☆11Updated 5 years ago
• grotius-cnc / skynet_robot_control_rtos_ethercat
  Realtime 6-axis robot controller, based on Qt C++ & OpenCascade & KDL kinematics & HAL
  ☆99Updated 3 years ago
• eeyoo / step-servo-tuner
  采用QT框架开发PC端串口通信程序，步进电机控制器与PC端通信，调试控制器程序
  ☆32Updated 8 years ago
• glocklueng / Qt-Serial-PID-Host
  Qt写的上位机，用来在线调试PID参数，使用串口通信
  ☆21Updated 9 years ago
• velarn / F28335-Second-Bootloader
  TMS320F28335 custom bootloader IAP
  ☆15Updated 8 years ago
• HUMASoft / CiA402Device_Archived
  Library under CiA 402 standard for device control. Documentation at:
  ☆15Updated 3 years ago
• suda-morris / FreeECAT
  EtherCAT Slave(XMC4800) and Master(IgH), Open source both in hardware and software
  ☆57Updated 7 years ago
• ART-robot / ethercat_install
  ethercat install
  ☆47Updated 8 years ago
• zhubwxxx / NVNUD
  远程在线升级程序 ，Qt，CAN，TCP，UDP，MODBUS
  ☆21Updated 7 years ago
• hermixy / QT
  基于QT 的组态软件
  ☆13Updated 8 years ago
• CalvinHsu1223 / IGH-EtherCAT-motor-control-sample
  Application for controlling Yaskawa & Panasonic EtherCAT servo motors.
  ☆20Updated 9 years ago
• ethercat-diy / stm32f4_ethercat
  ☆30Updated 9 years ago
• coreanq / qt_modbus
  Modbus-RTU, ASCII Test Program using Qt
  ☆24Updated 3 years ago
• Aslm / curve-qwt-com-thread
  1、实时解析串口数据并绘制相关曲线 | 2、串口单独一个进程（不影响GUI刷新) | 3、曲线、串口参数可配置、可保存
  ☆81Updated 6 years ago
• confidentFeng / cleanRobot
  扫地机器人Qt上位机
  ☆74Updated 5 years ago
• ybjx1987 / Device_Studio
  致力于使用Qt开发一款可以在多个平台运行的组态软件。
  ☆62Updated 8 years ago
• wenzhcoding / QT-Supervisory-Computer
  QT编写的上位机软件，实现了机电控制、ISA总线操作、串口读写等功能
  ☆20Updated 5 years ago
• MGDG / SLineControl
  电机控制中的S形曲线加减速控制，主要用于步进电机的平滑启动和停止，防止电机出现失步
  ☆33Updated 7 years ago
• feainioh / MotionController
  多轴运动控制
  ☆43Updated 6 years ago
• whm200410 / STM32_motion_control_board
  stepper motor motion controller using stm32f107
  ☆42Updated 8 years ago
• ShellAlbert / LaserHMI
  LaserHMI is a Qt-based project to supply control and monitor of Projector Laser Light Source in cinema.
  ☆29Updated 7 years ago
• trunliu / robot-program-offline
  机器人离线编程软件(基于Qt)-三维建模/离线编程/正逆解算法/轨迹规划/UDP/
  ☆42Updated 5 years ago
• PymZoR / S-curve-Planner
  C Library for planning n-th order S-curve motion profiles
  ☆56Updated 8 years ago
• MinfonTsai / eBikeMotor_dsp
  Control of PMSM Sensorless FOC algorithm, for Motors using dsPIC DSC" using a dsPICDEM™ MCLV-2 platform. To run on the dsPICDEM MCLV-2 De…
  ☆10Updated 8 years ago
• lucky-billy / Collected_Items
  Collected some projects of netizens, which have been tested and can be run.
  ☆29Updated 5 years ago
• SantaJiang / ModbusDebuger
  Qt实现的Modbus串口调试助手---Qt implementation of Modbus serial debugging assistant
  ☆52Updated 2 years ago
• FolderLevel / EtherCAT
  LAN9252 EtherCAT PHY工作原理分析
  ☆106Updated 6 years ago
• ModbusScope / ModbusScope
  ModbusScope logs data for analysis using the Modbus protocol.
  ☆77Updated this week
• judesmorning / ZLG_CAN_QT
  通过Qt库二次开发周立功的can盒子,通过Qt库二次开发周立功的can盒子，支持USB_CAN2和USB_2E_U，支持双通道同时工作。 关注公众号，与作者面对面交流：CPP朱小勇
  ☆62Updated 6 years ago