vittorio88 / WAVE300Links
Sources for Lantiq WAVE300 wi-fi drivers
☆13Updated 5 years ago
Alternatives and similar repositories for WAVE300
Users that are interested in WAVE300 are comparing it to the libraries listed below
Sorting:
- U-Boot for Kirkwood Devices☆50Updated 3 years ago
- Attempt to Reverse Engineer the Thinkpad DOSFLASH utility☆26Updated 7 years ago
- Deprecated, new place: https://gitlab.freedesktop.org/lima☆164Updated 7 years ago
- Broadcom CFE Bootloader☆42Updated 2 years ago
- Implementation of Lenovo ThinkPad HDD password algorithm☆122Updated 8 years ago
- Tools for modifying Lenovo embedded controller firmware☆104Updated 9 years ago
- Faifa can configure any Intellon-based Power Line Communication device using Intellon INT5000 and INT6000 series chips (6000 and 6300 chi…☆63Updated 4 years ago
- Little Kernel Application bootloader for Quectel EG25☆31Updated 3 years ago
- BFC5.5.10mp1 eCos open source for TC7210/TC7230 models☆24Updated 9 years ago
- Interface brnboot bootloader via serial port to backup firmware.☆34Updated 3 years ago
- LG Firmware flashing/dumping/ripping tool☆59Updated 3 years ago
- Deprecated, new place: https://gitlab.freedesktop.org/lima☆68Updated 5 years ago
- ☆38Updated 2 months ago
- A libusb based programming tool for 24Cxx serial EEPROMs using the WinChipHead CH341A IC☆165Updated last year
- Stock firmware recovery packages for Quectel EG25-G☆95Updated last year
- TJTAG JTAG flash programmer for WRT54G and related routers with Raspberry Pi support☆85Updated 6 years ago
- A small tool for managing the write protection flag of SD cards.☆270Updated 3 years ago
- Linux kernel driver for PATA bit-banging over GPIOs☆175Updated 5 years ago
- NXP Cryptographic Acceleration and Assurance Module (CAAM) - Linux driver☆46Updated last week
- Broadcom Crystal HD Hardware Decoder (BCM70012/70015) driver on Ubuntu☆41Updated 3 years ago
- ☆99Updated last year
- This is a sip client using the 2 FXS ports available on routers based on the Infineon Danube and running openwrt.☆17Updated 3 months ago
- Debian image creator for Turris Omnia board☆29Updated last year
- Diagnostics for Samsung SSD EVO 840☆52Updated 6 years ago
- A simple cross-platform utility written in Python which can update Brother printer firmwares☆129Updated 2 months ago
- Use the arduino as a JTAG adaptor with Tjtag☆47Updated 4 years ago
- GUI driver for minipro software found at https://github.com/vdudouyt/minipro☆68Updated 2 years ago
- Tools for Amlogic Meson ARM platforms☆46Updated 4 years ago
- A simple SPI/IIC programer based on ch341a.☆395Updated 11 months ago
- Linux source for Allwinner/Boxchip F20 (sun3i), A10 (sun4i) and A12/A13 (sun5i) SoCs☆95Updated last week