Alternatives and similar repositories for CAM8_software

Users that are interested in CAM8_software are comparing it to the libraries listed below

• axsdenied / cam86_ASCOM
  ASCOM driver for Cam86
  ☆11Updated 6 years ago
• gehelem / indi_cam86_ccd
  Indilib driver for CAM86 diy camera
  ☆14Updated 4 years ago
• TCWORLD / AstroEQ
  DIY Electronics System for connecting a non-Goto telescope to EQMOD
  ☆54Updated last year
• smr547 / cam86
  Build an CCD camera for astrophotography
  ☆14Updated 2 years ago
• Hansastro / Focuser
  Focuser for Astronomy based on Arduino (usable by Indi)
  ☆25Updated 7 years ago
• jbrazio / arduheater
  Open source closed-loop dew buster PID controller
  ☆26Updated 4 years ago
• astuder / epc901
  Experiments with ESPROS epc901 1024x1 CCD line sensor, including a spectroscope.
  ☆56Updated 2 years ago
• Gordon999 / Pi-AutoGuider
  AutoGuider for a telescope using a Raspberry Pi
  ☆29Updated last year
• Jana-Marie / EF-S-Adapter
  Hard- and Firmware to control different EF and EF-S lenses
  ☆128Updated 8 months ago
• charleslemaire0 / TeenAstro
  an easy to build and use telescope controller
  ☆30Updated last month
• vlaate / DobsonianDSC
  Simple low cost circuit to connect inexpensive optical encoders to a dobsonian telescope
  ☆85Updated 4 years ago
• benkrasnow / MultiSpectLED
  Array of 15 1W LEDs spanning 280nm to 940nm
  ☆105Updated last year
• kevinferrare / arduino-st4
  A PC-Telescope interface built around an arduino
  ☆94Updated 2 years ago
• gshau / SQM_TSL2591
  Sky Quality Meter based off the TSL2591 sensor
  ☆29Updated 6 years ago
• beckrd / DIY_SQM
  Two Sky Qaulity Meter Implementations using TSL2591
  ☆20Updated 6 years ago
• githubdoe / skysolve
  Use RaspberryPi and plate solving to take images of the night sky and identify the location of the image.
  ☆47Updated 3 months ago
• openlux / openlux-v1
  openlux - an open source CCD camera for deep-sky astrophotography
  ☆13Updated 3 years ago
• dEskoG / rDUINOScope
  rDUINOScope - Arduino based telescope control system (GOTO)
  ☆120Updated 5 years ago
• Galvant / gpibusb-pcb
  PCB KiCAD project files
  ☆77Updated 11 years ago
• marcoreps / laser_driver
  Energy efficient constant current diode laser driver
  ☆49Updated 7 years ago
• tliff / indi_ardust4
  INDI driver for an Arduino USB/ST-4 Interface
  ☆14Updated 6 years ago
• coreWeaver / LC-Meter
  Open Source LC-Meter. All documentation included.
  ☆86Updated 3 years ago
• openhoangnc / liteVNA
  Mirror of LiteVNA firmware and software https://drive.google.com/drive/folders/10lU5xnwmHDnPX98z21ky09N8nb_cEOk4
  ☆17Updated 3 years ago
• hjd1964 / OnStepX
  ☆165Updated this week
• drandyhaas / Haasoscope
  Docs, design, firmware, and software for the Haasoscope
  ☆151Updated last year
• frank26080115 / OpenMV-Astrophotography-Gear
  using OpenMV to assist in astrophotography
  ☆63Updated 4 years ago
• aewallin / One-Inch-Photodetector
  Photodiode transimpedance amplifier, on a one inch diameter circular PCB
  ☆22Updated last month
• OpenGammaProject / Open-Gamma-Detector
  ☢️👁️ Hardware for a hackable DIY gamma-ray spectrometer using a popular NaI(Tl) scintillator, SiPM and a Raspberry Pi Pico.
  ☆325Updated this week
• FaradayRF / FaradayRF-Hardware
  Faraday hardware design files
  ☆42Updated 9 years ago
• CosmicPi / CosmicPiV1.7PCB
  PCB for Version 1.7 of the Cosmic Pi Hardware. Incremental changes from V1.6. This design is licensed under the CERN OHL V1.2
  ☆14Updated 6 years ago