Alternatives and similar repositories for LPC17xx-DFU-Bootloader:

Users that are interested in LPC17xx-DFU-Bootloader are comparing it to the libraries listed below

• Smoothieware / SmoothieV2-LPC
  Smoothie for Version2 boards
  ☆38Updated 3 years ago
• hasenbanck / remram
  32bit STM32F7 based 3D printing controller using TMC2130 stepper driver
  ☆40Updated 4 years ago
• ErichStyger / McuOpenPnP_Machine
  Repository for the McuOnEclipse OpenPnP machine
  ☆64Updated 3 years ago
• hackaday3D / marlin_stm32
  stm32 for marlin 1.1.9
  ☆53Updated 5 years ago
• ktand / Armed
  Armed 3D Printer Controller
  ☆17Updated 3 years ago
• hasenbanck / heteromycin
  A 3D printer board using a powerfull STM32 MCU, TMC5160/TMC2160 driver and a Raspberry Pi or compatible SBC
  ☆39Updated 4 years ago
• imrahil / smoothieware-webui
  Better webUI for Smoothieware
  ☆21Updated 8 years ago
• ghent360 / PrntrBoardV2
  32-bit 3D Printer controller board using STM32F407 and replaceable TMC2660/2209 stepper drivers.
  ☆40Updated 3 years ago
• BETZtechnik / ICEpick--Direct-drive-pick-and-place-head
  Pick and Place head with dual nozzles
  ☆39Updated 4 years ago
• makerbase-mks / MKS-SERVO57B
  MKS SERVO57B is 3d printer closed loop stepper motor NEMA23 MKS SERVO57 developed by Makerbase that prevents losing steps. CPU is STM32F1…
  ☆21Updated 3 years ago
• bdring / PSoC_Grbl
  PSoc5 Port of Grbl CNC Controller
  ☆36Updated 7 years ago
• openpnp / mica-feeder
  Automatic SMT Tape Feeder by Pham Thang
  ☆19Updated 7 years ago
• simon-jouet / Marlin
  Optimized firmware for RepRap 3D printers based on the Arduino platform.
  ☆22Updated 3 years ago
• bobc / bobc_hardware
  Various hardware projects
  ☆86Updated 7 years ago
• Dark-Guan / Ananas
  This is an Arduino based program for step motor controller,Ananas.
  ☆51Updated 7 years ago
• BitLabProjects / Smoothieware-STM32
  Modular, opensource, high performance G-code interpreter and CNC controller written in Object-Oriented C++
  ☆14Updated 8 years ago
• clementleger / Smoothieware-STM32
  [DEPRECATED] Modular, opensource, high performance G-code interpreter and CNC controller written in Object-Oriented C++
  ☆38Updated 9 years ago
• ottoragam / Tarocco
  Closed Loop Motor Controller
  ☆132Updated 3 years ago
• RaD / SolderPaste14M2
  Solder Paste Dispenser
  ☆18Updated 10 years ago
• Scavenger18 / RepoPNP
  Files concering PAIND PNP Feeder
  ☆23Updated 6 years ago
• SebG3D / TapePuller
  tape puller/remover for 0816 automatic feeder
  ☆21Updated 5 years ago
• dungjk / grbl-stm32
  An open source, embedded, high performance g-code-parser and CNC milling controller. This is a port of GRBL 1.1 to STM32F10X target.
  ☆77Updated 2 years ago
• bitboxelectronics / R2C2_Firmware
  R2C2 -- electronics for RepRap 3D printers (and others), CNC and other machines.
  ☆35Updated 4 years ago
• GermanRepRap / Ramps-1.4.2
  forked from ultimachine/Ramps 1.4
  ☆64Updated 11 years ago
• Aus3D / RUMBA32
  A powerful 32-bit 3D printer control board.
  ☆70Updated 4 years ago
• pointhi / HighPower-Mechaduino
  Mechaduino derivative which drives up to 10A, drawn using KiCad
  ☆29Updated 5 years ago
• ManuLST / Marlin4ST
  A Marlin FW for the ST Microelectronics 3D printer board STEVAL-3DP001V1
  ☆106Updated 7 years ago
• Smoothieware / Smoothieboard2
  Hardware files for the Smoothieboard v2, and extension boards
  ☆56Updated 8 months ago
• mgineer85 / 0816-feeder-mechanics
  Mechanic Parts of the 3d printed automatic smt feeder for OpenPnP.
  ☆23Updated 4 years ago
• lhartmann / esp8266_reprap
  ESP8266-based I2S-output WS2812(B) Driver
  ☆51Updated 9 years ago