tomazas / RTL8XXX-SwitchLinks
Clone of https://bitbucket.org/jiajun/rtl8xxx-switch/src/master/
☆22Updated 5 years ago
Alternatives and similar repositories for RTL8XXX-Switch
Users that are interested in RTL8XXX-Switch are comparing it to the libraries listed below
Sorting:
- Using Arduino for manager giga ethernet switch based on RTL8367C(S) chip. TP-LINK TL-SG1005D rev.7☆25Updated 4 years ago
- ☆15Updated 7 years ago
- Winnermicro W60x Wi-Fi library reverse engineering notes & hackings☆18Updated 5 years ago
- The library for unmanaged switch ICs produced by Realtek, suitable for use with Arduino, includes a range of models: RTL8363NB, RTL8364NB…☆29Updated last year
- ☆18Updated 6 years ago
- ICN6211 Configurator☆42Updated 5 years ago
- ☆19Updated last year
- Opensource embedded controller firmware for sipeed boards.☆44Updated 6 years ago
- A daemon which communicates with serial port, also provides the OpenWrt ubus interface for IPC.☆18Updated 5 years ago
- ☆11Updated last year
- Simple CH347 SPI-NOR programmer☆17Updated 2 years ago
- openwrt for sigmastar SSD201/SSD202☆69Updated 3 years ago
- ☆26Updated 7 months ago
- Buildroot support for Allwinner V3s/S3/S3L☆49Updated 2 months ago
- USB-Blaster instance on CH55x MCU.☆53Updated 6 years ago
- WinChipHead CH341 linux driver for I2C, SPI and GPIO mode☆102Updated last month
- Linux driver for RTL8723DS.☆61Updated 2 years ago
- Please consider the new stm32-vserprog (https://github.com/dword1511/stm32-vserprog) project which uses libopencm3 and compiles with stan…☆67Updated 9 years ago
- high precision voltage, current, temperature meter and logger.☆44Updated last week
- USB-JTAG Adapter Using CH552☆69Updated 3 years ago
- The whole NFC solution (source code and schematic&layout) based on WCH chips☆46Updated 2 years ago
- f1c100s source code☆33Updated last year
- RFFC2071 C8051F330☆15Updated 7 years ago
- A tiny FPGA core module based on GW1NZ-LV1, CH552 and SLG46580☆27Updated 3 years ago
- Single-chip solution for Hi-speed USB2.0(480Mbps) JTAG/SPI Debugger based on RISC-V MCU CH32V30x/CH32V20x☆119Updated 2 years ago
- OpenOCD configuration for MT7688AN/MT7688KN/MT7628x☆38Updated 7 years ago
- A SPI-NAND flash programmer botched together using kernel SPI-NAND framework. Works with stm32-vserprog or WCH CH347.☆55Updated 2 years ago
- It's u-boot for mt7628 chip, which is supported by MediaTek, this repo adds some features such as web failsafe、GPIO interface and so on.☆19Updated 8 years ago
- SFP module test board for Raspberry Pi Pico☆63Updated last year
- Customized OpenOCD for Nuvoton devices☆54Updated 7 months ago