tinytronix / LoRaLinks
An Arduino Library for direct (peer-2-peer) LoRa data communication from device to device without the need of LoRaWAN internet connection. Developed for home automation purpose.
☆27Updated 5 years ago
Alternatives and similar repositories for LoRa
Users that are interested in LoRa are comparing it to the libraries listed below
Sorting:
- BasicMAC LoRaWAN stack that supports (but is not limited to) Arduino☆81Updated 4 years ago
- ESP32+RFM95 = Single-channel LoRa WiFI Gateway (or device!)☆30Updated 2 years ago
- This repo contains all the necessary design and fabrication files for the Seeed Studio LoRa-E5 based Penguino Feather breakout board.☆40Updated 4 years ago
- Lmic (LoraWAN-in-C) modified to C++☆68Updated 8 months ago
- LoRa WAN Single Channel Gateway☆46Updated 2 years ago
- Arduino LoRa EBYTE E22 device library complete and tested with Arduino, esp8266, esp32, STM32 and Raspberry Pi Pico (rp2040 boards).. sx1…☆133Updated 2 years ago
- STM32WL LoRaWAN Breakout board for RAK3172☆34Updated 2 years ago
- Arduino library for basic transmitting and receiving data using LoRa and FSK modulation☆74Updated 2 years ago
- Arduino & ESP-IDF libraries written for AXP19x, 20x☆96Updated 3 years ago
- LoraWAN-in-C library, adapted to run under the Arduino environment☆27Updated 7 years ago
- Easy LoRa Gateway v2.1 is an easy-to-use and PRODUCTION LoRa Gateway for home users and small businesses. This gateway will use an ESP32 …☆32Updated 2 years ago
- An 8-channel ESP32 LoRa Gateway based on SX1302☆68Updated 3 months ago
- Reference implementation of a Hardware Abstraction Layer and a Packet Forwarder for a LoRaWAN One Channel Hub. This is an ESP-IDF project…☆40Updated 6 months ago
- An Arduino library for sending and receiving data using LoRaWAN protocol and LoRa® radios.☆92Updated last month
- ☆12Updated 6 years ago
- A simple LoRa Mesh network low level layer for the Semtech SX126x transceivers.☆32Updated 2 years ago
- Airtime calculator for LoRaWAN☆53Updated last year
- [LEGACY] Easy LoRa Gateway is an easy-to-use Lora Gateway for home users and small businesses. This gateway will use an ESP32 with Semtec…☆37Updated 6 years ago
- Library for Arduino compatible with Cayenne Low Power Payload☆117Updated 3 weeks ago
- LoRaWAN Library☆71Updated last year
- A low budget battery powered LoRa node to smart up your city☆32Updated 7 years ago
- Software Source code for LoRa_GPS_Tracker☆50Updated 3 years ago
- Arduino Core for STM32L0☆125Updated 2 years ago
- ESP32 LoLin32 Lite Shield for RFM95 or RN2483 LoRa Modules☆27Updated 7 years ago
- STM32 and AVR128 Printed Circuit Board for creating IOT nodes with the RFM95 LORA chip☆19Updated 6 months ago
- An ESP32 and SHT30 form a data logger that is accessed via a webserver and graphs data via google Charts☆82Updated 2 years ago
- This repo contains all the necessary design and fabrication files for the Penguino SAMR34 RF module and its Feather breakout board.☆61Updated 5 years ago
- Example code and description how to use ESP32 low noise amplifier (LNA), including Arduino library and ESP-IDF component☆53Updated 5 years ago
- Development for LoRa☆19Updated 4 years ago
- ESP32 Frequency Counter using Pulse Counter and Remote Control modules☆70Updated 4 years ago