Lora-net / one_channel_hub
Reference implementation of a Hardware Abstraction Layer and a Packet Forwarder for a LoRaWAN One Channel Hub. This is an ESP-IDF project for ESP32 platform, with support of sx1261, sx1262, sx1268 and llcc68 Semtech radio chips.
☆24Updated last month
Alternatives and similar repositories for one_channel_hub:
Users that are interested in one_channel_hub are comparing it to the libraries listed below
- STM32WL LoRaWAN Breakout board for RAK3172☆31Updated last year
- Port of STM32WLxx example for RAK3172☆32Updated last year
- This repo contains all the necessary design and fabrication files for the Seeed Studio LoRa-E5 based Penguino Feather breakout board.☆38Updated 3 years ago
- ESP32+RFM95 = Single-channel LoRa WiFI Gateway (or device!)☆30Updated 2 years ago
- Advanced application of SeedStudio module Grove-Wio-E5 based on chip STM32WLE5JC from STM connected to an Arduino Nano 33 BLE Sense board…☆20Updated last year
- Example code and description how to use ESP32 low noise amplifier (LNA), including Arduino library and ESP-IDF component☆53Updated 5 years ago
- Open source files for RAK2270 Sticker Tracker☆25Updated 8 months ago
- BasicMAC LoRaWAN stack that supports (but is not limited to) Arduino☆80Updated 4 years ago
- ☆13Updated 6 years ago
- Arduino LoRa EBYTE E22 device library complete and tested with Arduino, esp8266, esp32, STM32 and Raspberry Pi Pico (rp2040 boards).. sx1…☆119Updated 2 years ago
- Easy LoRa Gateway v2.1 is an easy-to-use and PRODUCTION LoRa Gateway for home users and small businesses. This gateway will use an ESP32 …☆32Updated last year
- A simple SX1303 based LoRa Gateway for FeatherWing ecosystem.☆25Updated 3 years ago
- Examples for Canopus_RAK3172 board☆61Updated 5 months ago
- A simple LoRa Mesh network low level layer for the Semtech SX126x transceivers.☆31Updated last year
- AcSIP S7XG LoRaWAN/GPS module library☆26Updated 5 years ago
- RFC2217 (remote serial port) server library for ESP-IDF☆11Updated 7 months ago
- SX1262/SX1268/LLCC68 Low Power Long Range Transceiver driver for esp-idf☆100Updated last month
- Arduino library to support LoRaWAN communication using the STM32WL series.☆44Updated 2 months ago
- A ported Arduino Library for SX1302 from SX1302 HAL☆20Updated 4 years ago
- An enhanced bootloader to support compression upgrade and diff compression upgrade.☆26Updated 2 years ago
- Applications on LoRa-E5 mini/ LoRa-E5 Development Kit with v1.1.0 STM32Cube MCU Package for STM32WL series(SDK)☆68Updated 3 months ago
- [LEGACY] Easy LoRa Gateway is an easy-to-use Lora Gateway for home users and small businesses. This gateway will use an ESP32 with Semtec…☆37Updated 5 years ago
- WIP, does NOT work yet. See https://github.com/novag/LoRa-ATtiny-Node for a working version made for the ATtiny85.☆12Updated 4 years ago
- Arduino & ESP-IDF libraries written for AXP19x, 20x☆92Updated 2 years ago
- basic AiThinker Ra-08 ASR6601 SoC LoRaWAN Module 基于 ASR6601 安信可 Ra-08 LoRaWAN模组二次开发☆50Updated last year
- RFM9x Breakout Board☆25Updated last year
- An 8-channel ESP32 LoRa Gateway based on SX1302☆66Updated 5 months ago
- PCB design of breakout board for Ebyte E78 (ASR6501 or ASR6601) module☆19Updated 2 years ago
- LoRa-E5 Breakout board☆38Updated 3 years ago
- SX1276/77/78/79 Low Power Long Range Transceiver driver for esp-idf☆82Updated last month