Alternatives and similar repositories for bql-label-printer:

Users that are interested in bql-label-printer are comparing it to the libraries listed below

• bablokb / raspi2go
  Raspberry Zero as multi-gadget USB-stick
  ☆15Updated 4 years ago
• tbnobody / brother_ql_web
  A Python-based web service to print labels on Brother QL label printers. Based on brother_ql: https://github.com/pklaus/brother_ql
  ☆37Updated 9 months ago
• jjwbruijn / ESP32-epaper-station
  An E-paper shelf label (electronic shelf label or ESL) base station based on said shelf label and an ESP32
  ☆17Updated last year
• magcode / mopidy-mqtt
  MQTT features for Mopidy
  ☆23Updated last year
• probonopd / ptouch-770
  Brother P-touch P700 label printer for Linux
  ☆38Updated 2 years ago
• pilight / pilight_firmware
  Prefilter for 433 MHz remotes (and similar protocolls) written for an attiny45
  ☆19Updated 9 years ago
• hobbyquaker / rpi2mqtt
  Connect RaspberryPi GPIOs and 1-Wire temperature sensors to MQTT
  ☆23Updated 7 years ago
• bikerglen / pixpoe
  Control and power up to 20 W of neopixels or other WS2812b LEDs over ethernet!
  ☆21Updated 5 years ago
• kc-GitHub / Wettersensor
  ☆13Updated 7 years ago
• hennedo / guest-password-printer
  Guest network password printer, using Raspberry Pi Zero, a thermalprinter and this code.
  ☆27Updated 7 years ago
• cbdevnet / pt1230
  Brother P-Touch 1230PC Linux interface
  ☆32Updated 6 years ago
• hobbyquaker / speedtest2mqtt
  Run speedtest-cli and publish results via MQTT
  ☆15Updated 6 years ago
• jamct / radio-mailbox
  ESP32 with LoRa and a proximity sensor
  ☆35Updated 4 years ago
• sw-home / FHEM-HomeConnect
  FHEM Module to integrate your Home Connect household appliances
  ☆11Updated 3 years ago
• ivesdebruycker / node-red-contrib-maxcube
  A node-red node to control the eQ-3 Max! Cube
  ☆13Updated 2 years ago
• dersimn / owrtwifi2mqtt
  Using your OpenWRT Router's Wifi to detect if a person's smartphone is still in/near the apartment and publish via MQTT
  ☆75Updated 3 years ago
• hobbyquaker / lirc2mqtt
  An Interface that connects LIRC (Infrared Transceiver) to MQTT.
  ☆23Updated 5 years ago
• jpmens / notify-by-mqtt
  A Nagios/Icinga module to submit notifications to mqttwarn
  ☆15Updated 2 years ago
• abelits / ptouch-770
  Brother PT-H500/P700/E500 label printer control utility for Linux
  ☆25Updated 4 years ago
• piksel / pytouch-cube
  Qt5 Label Editor for Brother P-Touch Cube label maker
  ☆51Updated 9 months ago
• max2play / webinterface
  Browser Administration for Linux-Based Audio/Video-Player like ODROID or Raspberry Pi
  ☆43Updated last month
• elmo2k3 / dabpi_ctl
  dabpi_ctl - RPi fm/fmhd/dab receiver control interface
  ☆49Updated 9 years ago
• ullman / velog
  Serial log application for VE.Direct devices
  ☆12Updated 3 years ago
• rene0 / dcf77pi
  Yet another DCF77 decoder. This one is intended for the Raspberry Pi platform but might work on other devices using GPIO pins too.
  ☆18Updated 10 months ago
• trialinfo / ptouch-driver
  CUPS/Foomatic driver for Brother P-touch and QL label printers
  ☆9Updated 4 years ago
• nlimper / Mini-AP-v3
  Universal ESP32-C6 and ESP32-S3 based access point, usable as IEEE 802.15.4 <-> WiFi gateway and as OpenEpaperlink AP
  ☆20Updated last year
• PhantomVl / sccp_manager
  SCCP Manager
  ☆36Updated 3 years ago
• Blueforcer / SmartPusher
  SmartPusher is a wifi enabled button array wich lets you control your smarthome in different ways
  ☆19Updated last year
• bademux / rtl_433toMQTT
  rtl_433 to MQTT docker
  ☆26Updated 3 years ago
• Fohdeesha / home-automation
  PLC-Based Home Automation System
  ☆35Updated last year