sparkfun / hacker-applicationLinks
Join the web developers at SparkFun Electronics
☆48Updated 8 years ago
Alternatives and similar repositories for hacker-application
Users that are interested in hacker-application are comparing it to the libraries listed below
Sorting:
- SparkFun Transceiver Breakout - nRF24L01+☆16Updated 7 years ago
- A low cost ISM radio to wifi gateway☆41Updated 5 years ago
- ☆26Updated 5 years ago
- DroidScript for easier use of the BusPirate on your Android device.☆45Updated 8 years ago
- Software defined radio using Teensy 3.1, Teensy Audio shield and Softrock☆91Updated 8 years ago
- SatNOGS Antennas☆18Updated 6 years ago
- This is the Seeed wiki page☆59Updated 6 years ago
- Python code to drive a physical dashboard built with a Raspberry Pi, LED backpacks, and automotive gauges. See the full guide at: https:…☆12Updated 9 years ago
- Arduin-o-Phone☆17Updated 6 years ago
- Schematics, Gerbers, Bill of materials☆34Updated 10 years ago
- Content indexer for Outernet receivers☆47Updated 9 years ago
- I2C Driver for Adafruit's PN532-based NFC Shield☆130Updated 9 years ago
- Fork of FBTFT for use with Adafruit TS shield☆39Updated 10 years ago
- A breakout and development board for the ESP8266 WiFi SoC.☆42Updated 5 years ago
- E-Paper Badge with Teensy LC designed in KiCad☆37Updated 4 years ago
- Internet Connected Power Analyzer☆30Updated 9 years ago
- TiLDA Badge Version 3 - Hardware☆18Updated 8 years ago
- Edison Mezzanine breakout board for a 0.66" 64x48 monochrome OLED.☆16Updated 7 years ago
- Originally intended to be a controller for a RetroPie. A soft power controller that allows for Raspberry Pi proper shutdown. Intention is…☆22Updated 8 years ago
- Troubleshooting tool for embedded devices available from SparkFun Electronics☆75Updated 6 years ago
- SparkFun's adaptation of the FreeSoC project.☆16Updated 7 years ago
- Controller electonics and firmware for SatNOGS rotator☆39Updated 6 years ago
- The RedBoard is SparkFun's take on the Arduino Uno. It combines the simplicity of the Uno's Optiboot bootloader (which is used in the Pro…☆37Updated 5 years ago
- ecDB, Electronics Component DataBase☆57Updated 2 years ago
- This is the source code of the firmware shipped with your 1Sheeld board. It is an implementation of a custom version of the Firmata proto…☆45Updated 8 years ago
- Arduino (328P) based OBD port module☆33Updated 9 years ago
- 300 MHz to 3800 MHz TCVR daughter card for the Parallella board☆18Updated 11 years ago
- scripts for bill of materials generation from kicad☆13Updated 2 years ago
- Hardware designs for CC11xx☆101Updated 4 years ago
- COMMS Hardware for UPSat☆32Updated 6 years ago