Alternatives and similar repositories for Lipo_Charger_Basic-microUSB

Users that are interested in Lipo_Charger_Basic-microUSB are comparing it to the libraries listed below

• adafruit / Adafruit-PowerBoost-500-Charger-PCB
  PCB files for Adafruit PowerBoost 500C
  ☆21Updated 6 years ago
• andydoro / Wordclock-Wristwatch
  Word clock wristwatch using the TIMESQUARE watch and custom faceplate.
  ☆11Updated 5 years ago
• Seeed-Studio / OLED_Display_96X96
  Seeed OLED Display 96*96 library
  ☆12Updated 9 months ago
• watterott / RPi-DPI-HAT
  Display Parallel Interface HAT (Hardware Attached on Top) for Raspberry Pi
  ☆18Updated 5 years ago
• sparkfun / SparkFun_ATSHA204_Arduino_Library
  Repository for ATSHA204 Example code and design files
  ☆38Updated 10 years ago
• SyncChannel / LoRaWAN_FeatherWing
  Add the MicroChip RN2483/RN2903 LoRaWAN module to Feather
  ☆10Updated 9 years ago
• adafruit / Adafruit-METRO-328-PCB
  PCB files for the Adafruit METRO 328
  ☆43Updated 2 years ago
• Integreight / 1Sheeld-Schematics-and-Board
  This repository contains the schematics, board and Fritzing part files for the 1Sheeld board.
  ☆42Updated 8 years ago
• adafruit / Adafruit-Feather-M0-Basic-Proto-PCB
  PCB files for the Adafruit Feather M0 Basic Proto
  ☆36Updated 3 years ago
• sparkfun / ESP8266_Thing
  A breakout and development board for the ESP8266 WiFi SoC.
  ☆42Updated 5 years ago
• rocketscream / MAX31855
  MAX31855 Library for Arduino
  ☆29Updated 13 years ago
• microbuilder / LPC1114CodeBase
  Open Source SW Library for NXP's LPC1114 ARM Cortex M0 MCU
  ☆59Updated 11 years ago
• bluzDK / bluzDK-firmware
  Firmware for the bluz development kit
  ☆15Updated 7 years ago
• practicalarduino / WaterFlowGauge
  Use an Arduino and a hall-effect flow rate sensor to measure water usage.
  ☆50Updated 16 years ago
• Seeed-Studio / Arduino_IDE_for_RePhone
  Arduino IDE for RePhone
  ☆31Updated last year
• OnionIoT / Onion-Hardware
  Schematic of Onion Omega2 Docks and Expansions
  ☆92Updated 5 years ago
• sparkfun / SAMD21_Mini_Breakout
  A miniature SAM21G Breakout, in the form factor/pin-out of a Pro Mini.
  ☆43Updated 2 years ago
• Integreight / 1Sheeld-Firmware
  This is the source code of the firmware shipped with your 1Sheeld board. It is an implementation of a custom version of the Firmata proto…
  ☆45Updated 7 years ago
• SeeedDocument / Seeed-WiKi
  This is the Seeed wiki page
  ☆59Updated 6 years ago
• sparkfun / Blynk_Board_ESP8266
  ESP8266-based, Blynk-compatible, beginner-friendly programmable WiFi development board.
  ☆23Updated 5 years ago
• sparkfun / Micro_OLED_Breakout
  Breakout board for a monochrome, 0.66", 64x48 OLED display.
  ☆29Updated 6 years ago
• sparkfun / USB_Host_Shield
  SparkFun USB Host Shield
  ☆16Updated 4 years ago
• tedyapo / led-matrix-generator
  Eagle scripts for LED matrix display generation
  ☆14Updated 2 years ago
• CCHS-Melbourne / iotuz-esp32-hardware
  Project for the InternetOfTuz (LCA2017 Open Hardware Mini-Conference)
  ☆35Updated 8 years ago
• rocketscream / MiniUltraPro
  Mini Ultra Pro - Arduino Compatible 32-bit ARM Cortex M0+ Board
  ☆19Updated 3 years ago
• pimoroni / eagle
  Custom Eagle parts that we've created where needed. Please feel free to use, extend, and share! (CC v3.0 Share-Alike You are welcome to u…
  ☆42Updated last week
• adafruit / Adafruit-I2C-SPI-LCD-Backpack-PCB
  A simple way to add an LCD without using a lot of pins
  ☆16Updated 2 years ago
• sparkfun / RedBot
  Design files and firmware files for the RedBot robotics board.
  ☆23Updated 7 years ago
• sparkfun / Low_Current_Sensor_Breakout-ACS712
  SparkFun Low Current Sensor Breakout Board - ACS712
  ☆18Updated 7 years ago
• sparkfun / USB_LiPolyCharger_SingleCell
  USB LiPoly Charger - Single Cell
  ☆15Updated 10 years ago