spark2k06 / Internal_ISAOPL3Links
Internal ISA OPL3 for PCXT and compatibles.
☆21Updated 4 years ago
Alternatives and similar repositories for Internal_ISAOPL3
Users that are interested in Internal_ISAOPL3 are comparing it to the libraries listed below
Sorting:
- ☆18Updated 2 years ago
- Reproduction AdLib Sound Card, OPL2, Circa 1990☆16Updated 6 years ago
- AdLib clone. Based on schlae's PCB, with some modifications.☆19Updated 6 years ago
- Monotech DeluxeFloppy. ISA HD FLoppy + Serial + Boot ROM Card☆18Updated 5 years ago
- ISA OPL2 Card☆27Updated last year
- This board is and EGA clone based on a reversed PA-WTEGA card, based on the chipset by CHIPS (P82C435 + P82A436).☆23Updated last year
- Open source retro ISA video card☆21Updated 2 years ago
- Real Time Clock for your PC XT. Very low profile, simple and open hardware.☆32Updated 6 months ago
- Attempt to reverse-engineer a Proton PT8010AF based Turbo XT motherboard☆20Updated 3 years ago
- 8088-compatible 8-bit ISA PC/104 SVGA Card☆27Updated 5 years ago
- Serial Mouse Blaster PCB☆11Updated last year
- The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics☆49Updated 10 months ago
- ☆18Updated 2 years ago
- Innovation SSI-2001 replica that can be built without vintage components☆24Updated 4 years ago
- Use USB input devices on Amiga computers, using the excellent Raspberry Pi Pico as a USB-to-bitbang adapter.☆52Updated 9 months ago
- 4 MB and 16 MB 30-pin DRAM SIMMs☆23Updated last year
- PCMCIA OPL3 Sound Card☆27Updated 3 months ago
- A wavetable module powered by a Raspberry Pi Zero 2W and mt32-pi☆53Updated 2 months ago
- CL-GD5434-based ISA VGA card.☆29Updated 4 years ago
- Sound Card for the ISA (8bit) bus sporting Sound Blaster / Sound Blaster PRO emulation via ES688F chip, and a real Yamaha OPL3 FM Synth. …☆39Updated last year
- This Device allows to connect a PS/2 Mouse to your Serialport☆39Updated 4 years ago
- Monotech XT-IDE Deluxe - Bootable ISA CF+IDE Interface☆29Updated 2 years ago
- Adapt a floppy cable meant to use an edge connector to use a 34-pin female pin connector instead.☆16Updated 4 months ago
- 8bit ISA NE2000-compatible network card based on the RTL8019AS chip☆27Updated 2 years ago
- This board converts CGA/EGA/MDA/Hercules TTL signals into analog RGB signals that can be fed into a compatible monitor☆16Updated 6 months ago
- A board outline and pad connections for 72-pin SIMM memory.☆26Updated 2 years ago
- A voltage adapter PCB for 486 CPUs☆41Updated last year
- ISA Floppy Disk and Serial Controller☆37Updated last year
- ISA sound card based on the SAA1099 sound generator☆37Updated 7 years ago
- SARC 2016 Chipset Based 386SX/486SLC Motherboard☆21Updated last year