Alternatives and similar repositories for Voron-Hexy

Users that are interested in Voron-Hexy are comparing it to the libraries listed below

• majarspeed / Voron-9mm-belt-mod
  ☆33Updated 3 years ago
• propeller3D / Xolth
  Xol toolhead mod
  ☆21Updated last year
• hadesz / v2blorgr-config
  V2 BlOrGr Config
  ☆16Updated last year
• Dfdye / Voron_Mods
  ☆29Updated last year
• juliusjj25 / z-umbilical_mod
  Voron 2.4 z-umbilical mod
  ☆18Updated last year
• mandryd / VoronUsers
  Voron Community mods, slicer profiles and firmware configurations.
  ☆37Updated 2 years ago
• DraftShift / DoorBuffer
  Simple printable doorbuffer to claw back 15-20mm without upgrading the front frame.
  ☆40Updated this week
• SoftFever / Voron2.4_350_SoftFever
  ☆20Updated 2 years ago
• szabieable / MonolithMammothMufflerExhaust
  ☆13Updated last year
• Armchair-Heavy-Industries / Octocron
  8WD Doom Micron Show Printer
  ☆16Updated 2 years ago
• MagicPhoenix / MPX-VORON-AWD
  VORON 6mm/9mm CNC AWD Gantry
  ☆11Updated 2 years ago
• Thescarecow / Archetype_Rail_Carriage_Clamp_Mod
  A modification to the Armchair Heavy Industries Archetype Rail Carriage mount to clamp belts directly
  ☆18Updated last year
• Monolith3D / Monolith_Bed_Fans
  ☆42Updated last year
• ReXT3D / Voron-Mods
  Modifications & tweaks to my Voron 2.4
  ☆18Updated 2 years ago
• Armchair-Heavy-Industries / Trailhead-XY-Joints
  Modified XY joints for the Voron 2.4 and Trident
  ☆48Updated 2 years ago
• fbeauKmi / V2.3934
  Mod and config for Voron 2.4
  ☆25Updated 2 months ago
• bwilliams9611 / ERCF_BallJoint_Passthrough
  ☆24Updated 3 years ago
• robandwend / BoxTurtleLid
  Lid / Hat for BoxTurtle Automated Filament
  ☆16Updated 10 months ago
• gennro / ERCFMods
  ERCF Mods
  ☆27Updated 2 years ago
• DraftShift / klipper-toolchanger
  Tool changing extension for Klipper
  ☆44Updated 2 months ago
• Demitryk / Voron2.4-Mods
  My personal Voron2.4 Mods
  ☆53Updated 3 years ago
• Armchair-Heavy-Industries / Escapement
  Gallileo 2 rehousing native fit for Archetype, Xol and others
  ☆15Updated 11 months ago
• DraftShift / Tophat
  ☆48Updated this week
• Turge08 / klipper_filament_dryer
  ☆39Updated last year
• skuep / GBB15
  A gantry-mounted CAN stepper driver board for 15mm aluminum beams (mostly for PrintersForAnts printers). This is heavily work in progress…
  ☆49Updated last year
• Drachenkaetzchen / Voron-Documentation
  Sources of the documentation website for all Voron 3D printers
  ☆14Updated 3 years ago
• majarspeed / Misc-Voron
  Small but useful mods
  ☆40Updated 2 years ago
• WV-design / Trinity-toolhead
  A single piece high performance toolhead option
  ☆43Updated 2 months ago
• kieraneglin / Thumper-Blocks
  ☆36Updated 2 years ago
• selliott79 / Voron-V2-Umbilical-Mounts
  Umbilical mounting system for the V2 that doesn't require de-term/ re-term
  ☆17Updated 4 years ago