Alternatives and similar repositories for PID_Simulator:

Users that are interested in PID_Simulator are comparing it to the libraries listed below

• UniSwarm / UDTStudio
  UniSwarm Tools for UDT interface and CANOpen in Qt5/6
  ☆31Updated 11 months ago
• Azure2016 / uDSO
  基于Qt的虚拟示波器软件
  ☆27Updated 5 years ago
• ilpropheta / anvedi
  Qt/QCustomPlot Data Viewer
  ☆15Updated 8 years ago
• AzenkChina / VirtualTools
  Utilities for virtual meter, based on QT.
  ☆9Updated 4 years ago
• 2782694792 / arduinoArmSystem
  基于 Qt 的机械臂操作系统 —— Arduino、四轴桌面电动机械臂、Qt 开发上位机、USB 串口通信
  ☆12Updated 2 years ago
• yltzdhbc / cangaroo_win
  我编译的开源CAN分析软件 cangaroo 的windows编译版本
  ☆11Updated 3 years ago
• HUMASoft / CiA402Device_Archived
  Library under CiA 402 standard for device control. Documentation at:
  ☆14Updated 3 years ago
• the-fenrir / Fuzzy-PID
  STM Code implementing Fuzzy Logic for PID to drive motor.
  ☆20Updated 6 years ago
• ZhiliangMa / MPU6500-HMC5983-AK8975-BMP280-MS5611-10DOF-IMU-PCB
  以MPU6500-HMC5983-AK8975-BMP280-MS5611为传感元件的10轴IMU PCB，有三种不同尺寸的组合样式，Altium格式，可直接打样
  ☆10Updated 3 years ago
• wuzhl2018 / cx_sch
  在嵌入式软件开发当中，常常第一步就是设计整个系统的架构。有基于OS的，也有裸机的。我们先拿裸机说事儿，我想很多人在做单片机的裸机开发（甚至基于OS）时脑海里根本没有设计架构的想法，从来都是while（1）循环到底，能写点状态机已经算是基础扎实的人物了。那么问题来了，whil…
  ☆13Updated 5 years ago
• timojaask / C-CANopen-Stack
  A simple CANopen stack implemented using C programming language.
  ☆11Updated 11 years ago
• dccharacter / STM32_Servo_Controller
  STM32-based servo/CNC/3D-printer controller
  ☆43Updated 12 years ago
• VojislavM / UART_TLV
  TLV protocol on STM32 via UART
  ☆11Updated 8 years ago
• hanfengcan / IAP_Load
  STM32 IAP升级工具
  ☆13Updated 10 years ago
• nucleron / RTE
  ☆55Updated 5 years ago
• yangfuyuan / STM32Programming
  stm32 bootloader for qt
  ☆18Updated 5 years ago
• velarn / F28335-Second-Bootloader
  TMS320F28335 custom bootloader IAP
  ☆15Updated 7 years ago
• suda-morris / FreeECAT
  EtherCAT Slave(XMC4800) and Master(IgH), Open source both in hardware and software
  ☆55Updated 7 years ago
• yuqlid / EtherCAT_board
  EtherCAT slave board uisng LAN9252
  ☆13Updated 7 years ago
• tonyho / MIO_PID_Controller
  Multiple input and output graphic PID Controller, based on STM32, using the μC/OS-II and μC/GUI 3.98
  ☆20Updated 9 years ago
• Aslm / curve-qwt-com-thread
  1、实时解析串口数据并绘制相关曲线 | 2、串口单独一个进程（不影响GUI刷新) | 3、曲线、串口参数可配置、可保存
  ☆80Updated 5 years ago
• zjm1060 / stm32h7_flashloader
  QSPI flashloader(25q128)
  ☆19Updated 3 years ago
• ScarsFun / pc_simulator
  Qt-Creator project to run LittlevGL PC Simulator for Windows
  ☆17Updated 6 years ago
• rqbh / RTGUI
  GUI component for RT-Thread
  ☆28Updated last year
• KitSprout / kSerial_Matlab
  KitSprout Serial Protocol (MATLAB)
  ☆12Updated 3 years ago
• APCVSRepo / HMI_SDK_LIB
  A sample Qt HMI sdk to use with sdl_core, which encapsulated json parser
  ☆10Updated 6 years ago
• DieBieEngineering / DieBieMS-Bootloader
  This is the bootloader firmware portion of my DieBieMS battery management system.
  ☆23Updated 6 years ago
• plumbum / usb2can
  USB/Serial to CAN bus converter
  ☆21Updated 8 years ago
• kmakise / IndustrialDopplerFlow
  基于STM32的工业声学多普勒流速流量仪交互节点使用Dwin屏交互Modbus协议4-20ma
  ☆11Updated 3 years ago
• tanyigergo / DP_Slave_HW
  Hardware design of the Profibus DP slave device
  ☆12Updated 7 years ago