sengeiou / TRE_FlowersLinks
LVGL, NES, STM32, 阅读器,定位,时钟,温湿度,大气压等等
☆72Updated 3 years ago
Alternatives and similar repositories for TRE_Flowers
Users that are interested in TRE_Flowers are comparing it to the libraries listed below
Sorting:
- ☆26Updated 2 years ago
- 基础按键处理库,实现了一般按键的单点、连点、长按检测。可进行多按键的封装,采用回调的方式与主程序通讯。☆73Updated 2 years ago
- ☆67Updated 5 years ago
- 基于STM32F401的迷你devFramework☆44Updated 6 months ago
- 一个基于小型单片机的菜单事件驱动框架☆46Updated 3 years ago
- a petite driver base on mcu such as stm32(f103/f407/h750), RT1052☆103Updated 10 months ago
- An embedded menu framework based on linked list, with easy item registration method 链表式嵌入式菜单框架,具有极简的条目注册方法☆189Updated 10 months ago
- STM32F1和F4的bootloader,以及使用Ymodem串口OTA,使用DTU4G模块OTA示例代码☆46Updated 2 years ago
- 这是一个灵感源自WouoUI的纯C语言(C99标准),无依赖库(只需要C的标准库),适用于多种不同大小屏幕,极易部署的代码框架,可以快速构建、开发一个丝滑、Q弹的单色屏UI。☆211Updated 3 months ago
- iWatch的视频展示请移步B站,交流讨论QQ群:659521788☆58Updated 3 years ago
- STM32 CM3 Project☆160Updated 6 years ago
- 功能强大的状态机按键,支持单双击、短长按等等☆11Updated 5 years ago
- 使用STM32CubeM进行配置 串口+DMA+IDLE中断 实现不定长度的数据接收与发送☆35Updated 5 years ago
- A simple page manager for LVGL.☆74Updated 2 years ago
- ☆20Updated 2 months ago
- 嵌入式按键处理驱动(Button Driver),支持单击、双击、多击、自动消抖、长按、长长按、超长按 | 低功耗支持 | 组合按键支持 | 静态/动态注册支持☆209Updated 5 months ago
- 平衡小车☆43Updated 3 years ago
- 一个基于C语言开发的面向底层设备驱动的驱动库☆177Updated 2 years ago
- 基于STM32 HAL库的外设驱动库☆255Updated 2 years ago
- STM32系列离线烧写器☆204Updated 2 years ago
- 基于LVGL的一个简单的页面管理框架☆28Updated 2 years ago
- STM32F207VCT6 learning resource☆122Updated 8 months ago
- 将Nwatch(watch X)移植到到Stm32 上,目前已经可以演示部分效果 https://soysauce007.github.io/nwatch/2020/02/13/NWatch/☆149Updated 5 years ago
- some device driver base on stm32f407☆199Updated 6 years ago
- STM32 IO口模拟实现软件串口。☆56Updated 6 years ago
- STM32 IAP(UART模式)的Application部分(USMART版)☆79Updated 6 years ago
- STM32 IAP(UART模式)的上位机部分☆143Updated 6 years ago
- ☆21Updated 2 years ago
- 一个基于云端语音识别的智能控制设备,类似于天猫精灵,小爱同学。采用的芯片为stm32f407,wm8978,esp8266。☆283Updated last year
- 纯C语言实现的一个按键驱动,可移植性强,支持单双击、连按 、连按释放、长按;采用回调处理按键事件(自定义消抖时间),使用只需3步,1:创建按键,2:按键事件与回调处理函数链接映射。然后周期检查按键。☆394Updated 4 years ago