rs1729 / pico_ttl2vgaLinks
Pico TTL (MDA/CGA/EGA) to VGA converter
☆16Updated last year
Alternatives and similar repositories for pico_ttl2vga
Users that are interested in pico_ttl2vga are comparing it to the libraries listed below
Sorting:
- MDA/CGA/EGA to VGA FPGA Converter V2.00☆67Updated 6 years ago
- A 16MB 30 pin SIMM☆49Updated 2 years ago
- Firmware that emulates a trio of devices for Apple's ADB bus: a keyboard, a mouse, and a modem.☆20Updated 2 years ago
- Internal ISA OPL3 for PCXT and compatibles.☆21Updated 4 years ago
- This is a modified version of the Graphics Gremlin ISA CGA/MDA graphics card to include a HDMI port.☆58Updated 10 months ago
- 8bit ISA NE2000-compatible network card based on the RTL8019AS chip☆32Updated 3 years ago
- A Pi Pico based MDA/CGA/EGA to VGA adapter☆67Updated last week
- 4 MB and 16 MB 30-pin DRAM SIMMs☆29Updated last year
- Build a retro ISA or PC / 104 slot-based system on an ITX format board☆35Updated 4 years ago
- Real Time Clock for your PC XT. Very low profile, simple and open hardware.☆32Updated last year
- 386 Mainboard☆82Updated last year
- Adapts standard PC floppy drives for use with IBM PS/2 computers that have 40 pin edge connectors☆35Updated 4 years ago
- Monotech XT-IDE Deluxe - Bootable ISA CF+IDE Interface☆29Updated 2 years ago
- ISA OPL2 Card☆31Updated 2 years ago
- Arduino-based USB keyboard and Mouse to ADB adapter. Allows USB keyboards and mice to be used with vintage Macintosh computers.☆56Updated last year
- A microprocessed RGB to HDMI Converter with USB capture☆112Updated last year
- Drop-In replacement for Dallas DS12887 RTC module☆50Updated 3 years ago
- This repository contains the KiCad files and the gerber files for the DuPAL boards.☆54Updated 9 months ago
- PAL brute forcing using closed loop feedback w/ open-tl866☆24Updated 3 years ago
- Use USB input devices on Amiga computers, using the excellent Raspberry Pi Pico as a USB-to-bitbang adapter.☆55Updated 3 months ago
- Apple II VGA PCB☆14Updated 2 years ago
- Smaller SMD version of Sergey Kiselev's Micro 8088 SBC, with XT-CF added☆16Updated 6 years ago
- ☆19Updated 2 years ago
- A voltage adapter PCB for 486 CPUs☆45Updated 2 years ago
- CH376 on ISA card with BIOS ext☆25Updated 2 years ago
- Open-source 486 ATX Motherboard☆72Updated 2 years ago
- This project aims at reading the ROM content out of a mask programmed MC6801 uP.☆21Updated 3 years ago
- PCB design for the pal dumper created by Charles MacDonald☆20Updated 8 years ago
- LABS BlasterBoard files repository☆42Updated 3 years ago
- Tiny IBM PC compatible machine with 386 CPU, integrated VGA and sound.☆75Updated last year