Alternatives and similar repositories for esphome_modbus_bridge

Users that are interested in esphome_modbus_bridge are comparing it to the libraries listed below

• klatremis / esphome-for-deye
  Esphome component for Deye 3 phase inverters for Home Assistant
  ☆197Updated last year
• SzczepanLeon / esphome-components
  ☆262Updated 3 weeks ago
• patman15 / BMS_BLE-HA
  This integration allows to monitor Bluetooth Low Energy (BLE) battery management systems (BMS) from within Home Assistant.
  ☆262Updated this week
• cfeenstra1024 / kamstrup-multical-hardware
  PCB and housing for ESPHome integration with Kamstrup Multical 403 meter
  ☆38Updated last year
• syssi / esphome-votronic
  ESPHome component to monitor votronic devices via BLE or Display Link
  ☆25Updated last week
• willglynn / taptap
  An implementation of the Tigo TAP protocol
  ☆57Updated last month
• DomiStyle / esphome-dlms-meter
  ESPHome component to read out DLMS smart meters via M-Bus
  ☆120Updated last year
• pvprodk / HA-seplos-bms
  Home Assistant Dashboard for BMS'es
  ☆15Updated last year
• jesusrop / esphome_huawei_sun2000
  Read your Huawei Sun 2000 inverter data from Home assistant using Modbus RTU
  ☆57Updated 3 years ago
• cenobitedk / esphome_multical402
  Kamstrup Multical 402 for esphome
  ☆36Updated 2 years ago
• syssi / esphome-seplos-bms
  ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART, RS485 or BLE
  ☆106Updated last week
• zibous / ha-watermeter
  Data provider for smartmeter watermeter.
  ☆253Updated 2 months ago
• syssi / esphome-pipsolar
  ESPHome component to monitor and control a pipsolar inverter via RS232
  ☆142Updated 2 weeks ago
• Mights001 / DeyeFirmware
  Deye Firmware for LV and HV
  ☆97Updated last week
• byte4geek / SEPLOS_MQTT
  Read data From Seplos BMS and send them to the Home Assistant
  ☆46Updated 2 years ago
• irekzielinski / Pylontech-Battery-Monitoring
  Adding WiFi monitoring to US2000B and US2000C batteries.
  ☆151Updated 3 years ago
• Fabian-Schmidt / esphome-victron_ble
  Use official Victron BLE endpoint for fetching data from Victron devices via Bluetooth LE via ESPHome.
  ☆345Updated last week
• KinDR007 / VictronMPPT-ESPHOME
  Victron Mppt charger ve.direct to esphome node
  ☆382Updated 3 months ago
• hidaba / PylontechMonitoring
  Adding WiFi monitoring to US2000B , US2000C , US5000 batteries.
  ☆34Updated 4 months ago
• dmslabsbr / esphome-somfy
  Esphome configuration for Somfy Blind
  ☆36Updated 4 years ago
• softwarecrash / Victron2MQTT
  Little Program for ESP82XX to get the Victron data to web and MQTT
  ☆95Updated last month
• Uksa007 / esphome-jk-bms-can
  ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon
  ☆194Updated last year
• WouterTuinstra / Homeassistant-Growatt-Local-Modbus
  Provides Home Assistant sensors for Growatt inverters that you can connect directly using modbus protocol
  ☆56Updated last week
• slipx06 / sunsynk-power-flow-card
  ⚡A customizable Home Assistant card to emulate the Sunsynk System flow that's displayed on the Inverter screen.
  ☆329Updated 3 weeks ago
• kellerza / sunsynk
  Deye/Sunsynk Inverter Python library and Home Assistant OS Addon
  ☆286Updated this week
• rstcologne / ESP-Home-Fairland-Heatpump
  Control Fairland Heatpumps without Tuya
  ☆33Updated last year
• psvanstrom / esphome-p1reader
  ESPHome custom component for reading P1 data from electricity meters.
  ☆319Updated 9 months ago
• slipx06 / Sunsynk-Home-Assistant-Dash
  Home Assistant Dashboard to display Inverter information. ESPHome configuration to collect inverter sensor data via modbus
  ☆185Updated 2 weeks ago
• txubelaxu / esphome-jk-bms
  ESPHome components to monitor and control a Jikong Battery Management System (JK-BMS) via UART-TTL or BLE. Monitor multiple JK-PBx (hw v1…
  ☆57Updated 9 months ago
• jdeath / BLE-YC01
  Home Assistant BLE Integration for BLE-YC01 Pool Monitor
  ☆39Updated 5 months ago