rkrenicki / TI99-MotherboardLinks
☆17Updated last month
Alternatives and similar repositories for TI99-Motherboard
Users that are interested in TI99-Motherboard are comparing it to the libraries listed below
Sorting:
- TI-99/4A to Raspberry PI messaging through console sideport☆12Updated 5 years ago
- a 2022 replica of the classic TI/994a, using obtainable parts☆44Updated last year
- Commodore 64 PLA replacement☆30Updated 7 years ago
- Arduino DSKx / 32K / FTP / NTP shield for the TI99/4a☆16Updated 6 months ago
- gcc implementation of 32k expansion ram test that runs on TI-99/4A console from ROM cartridge space.☆20Updated 4 years ago
- C64 Pi Interface☆14Updated this week
- KiCAD Schematic for Commodore VIC-20☆15Updated 6 years ago
- ☆21Updated last year
- A further in SMT developed Version of the C128toSCART_THT project☆15Updated 3 years ago
- Reverse engineering the original Colecovision video game console.☆13Updated last year
- ☆19Updated 2 years ago
- A PCB for creating Amiga SCART or Amiga VGA cables. You can also use this adapter to feed a new clock to the Amiga via XCLK making your m…☆28Updated 4 years ago
- ☆12Updated 4 years ago
- Use USB input devices on Amiga computers, using the excellent Raspberry Pi Pico as a USB-to-bitbang adapter.☆55Updated 4 months ago
- A small daughterboard adapter that replaces a 6502 processor (used in vintage 8-bit computers such as the VIC-20, Apple II and BBC Micro)…☆41Updated 4 years ago
- A Raspberry Pi Pico (RP2040) based Apple IIe expansion card with USB isolation.☆12Updated 4 years ago
- ☆18Updated 2 years ago
- Apple II VGA PCB☆14Updated 2 years ago
- ☆34Updated last year
- Atari 130XE (64x4) Assy No. CA200519 motherboard replica☆19Updated 4 months ago
- 65(c)02 to 7501/8501 converter☆18Updated 3 years ago
- A recreation of the CP/M cartridge for the Commodore 64.☆28Updated 6 years ago
- DRAM Tester Shield for Arduino Uno/Nano☆11Updated 4 years ago
- PlusD Clone for all ZX Spectrum computers, based on the designs by @Pachuquin & @alvaroalea.☆17Updated 4 months ago
- A ReAgnus MegaAChip PCB that takes a Gowin FPGA with embedded PSRAM, a PLCC-84 plug and FET level shifters.☆29Updated 10 months ago
- WiFi card for Apple II series computers (roughly superserial compatible)☆12Updated 3 years ago
- A 68000 socketed ITX form factor Minimig.☆24Updated last month
- Spitfire 2000, A low-end 42 MHz Accelerator with IDE and 4/8 MB fast RAM for the Amiga 2000 co-pro slot (or A500 through an adapter).☆27Updated 3 months ago
- Reverse Engineering of the Schnedler Systems 4MHz TurboMaster accelerator cartridge for the Commodore 64☆26Updated 5 years ago
- An internal WiFi using ESP32 microcontroller for Commodore computers (C64, C128) with level translators to a parallel bus interface so it…☆14Updated 5 years ago