Alternatives and similar repositories for powerctrl

Users that are interested in powerctrl are comparing it to the libraries listed below

• Frankkkkk / python-pylontech
  Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485
  ☆84Updated 2 years ago
• kwindrem / VeCanSetup
  Manages Victrion VenusOs VeCan (aka CANbus) ports
  ☆54Updated 10 months ago
• irekzielinski / Pylontech-Battery-Monitoring
  Adding WiFi monitoring to US2000B and US2000C batteries.
  ☆153Updated last month
• syssi / esphome-soyosource-gtn-virtual-meter
  ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter
  ☆95Updated 2 weeks ago
• softwarecrash / Daly2MQTT
  ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems
  ☆178Updated 5 months ago
• chickey / RS485-WiFi-EPEver
  This project is for connecting to EPEver charge controllers over WiFi for viewing running stats and also allows automatic posting of them…
  ☆74Updated last year
• gonium / gosdm630
  An interface for the Eastron SDM/Modbus smart meter series.
  ☆74Updated 6 years ago
• victronenergy / dbus-shelly
  HTTP based driver for Shelly energy meters to be used on VenusOS
  ☆28Updated this week
• njfaria / SolPipLog
  Logger for the PIP Inverter series ( USB / RS232 version )
  ☆96Updated 2 years ago
• juamiso / PYLON_EMU
  Python script to emulate the outgoing CAN bus traffic from a Pylontech LFP battery pack (48V)
  ☆45Updated 4 years ago
• nygma2004 / growatt2mqtt
  Growatt Solar Inverter Modbus Data to MQTT Gateway
  ☆178Updated 2 years ago
• freakent / dbus-mqtt-devices
  A driver for Victron VenusOS GX devices to support use of dbus-mqtt/flashmq-mqtt
  ☆147Updated 4 months ago
• softwarecrash / EPEver2MQTT
  ESP82XX based connector for EPEver Solar tracker systems, control and watch Multiple devices over webinterface and MQTT
  ☆64Updated 5 months ago
• Uksa007 / esphome-jk-bms-can
  ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon
  ☆198Updated last year
• syssi / esphome-pace-bms
  ESPHome component to monitor and control a PACE Battery Management System (PACE-BMS) via RS485 (Modbus)
  ☆72Updated 2 weeks ago
• softwarecrash / Victron2MQTT
  Little Program for ESP82XX to get the Victron data to web and MQTT
  ☆99Updated this week
• shining-man / bsc_hw
  Hardware battery safety controller (BSC)
  ☆29Updated last year
• KlausLi / Esp-Seplos-Controller
  Seplos Controller mit Webseite Der Esp8266 ist über ein Rs485 Modul mit dem Seplos BMS verbunden und kann diesem seine Daten entlocken. S…
  ☆30Updated 3 years ago
• syssi / esphome-seplos-bms
  ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART, RS485 or BLE
  ☆109Updated 2 weeks ago
• ai-republic / bms-to-inverter
  Use, monitor and control any battery brand with any inverter! Application to read and monitor data from BMSes and write data to an invert…
  ☆228Updated last month
• ClassicDIY / PylonToMQTT
  Reads data from the Sage BMS console port and publishes to MQTT
  ☆28Updated 11 months ago
• Sleeper85 / esphome-jk-bms-can
  ☆104Updated last year
• syssi / esphome-virtual-can-bms
  ESPHome component to emulate a SMA/Victron compatible BMS via CAN bus
  ☆16Updated 2 months ago
• shining-man / bsc_fw
  Firmware battery safety controller (BSC)
  ☆145Updated this week
• tobiasfaust / SolaxModbusGateway
  Modbus RTU to MQTT Gateway
  ☆99Updated last month
• byte4geek / SEPLOS_MQTT
  Read data From Seplos BMS and send them to the Home Assistant
  ☆47Updated 2 years ago
• Zeppelin500 / MBusino
  M-Bus --> MQTT-Gateway with shields for ESPs
  ☆76Updated last week
• victronenergy / dbus-flashmq
  Plugin for FlashMQ that interfaces between DBUS and MQTT.
  ☆63Updated this week
• Tertiush / bmspace
  Pace Battery Management System
  ☆61Updated last year
• bohdan-s / Sungrow-Inverter
  Information collected about Sungrow Invter, focusing on SG7.0RT with WiNet-S Dongle
  ☆45Updated 6 months ago