rickkas7 / RF9X-RK
Port of the RadioHead RF95/96/97/98 LoRa Packet radio driver for Particle
☆12Updated 2 years ago
Alternatives and similar repositories for RF9X-RK:
Users that are interested in RF9X-RK are comparing it to the libraries listed below
- Particle Tracker reference application☆24Updated 2 months ago
- Hardware for the Pi In The Sky Project☆14Updated 8 years ago
- OLHZN Arduino Mega High Altitude Weather Balloon APRS Radio Tracking & Data Logger☆17Updated 6 years ago
- Backplane to connect an iC880A-SPI concentrator board to a Raspberry Pi, with protection against reversed power supply and voltage spikes…☆15Updated 5 years ago
- Technical application notes for hardware and software designs and best-practices.☆31Updated 4 years ago
- nRF52 SDK(v16) based OS for use with Particle Xenon and other nRF52840 boards.☆15Updated 2 years ago
- Small Lora(WAN) board using an Atmega1284P chip and RFM95 module☆19Updated last year
- Collection of sketches using the Arduino core for Murata's CMWX1ZZABZ (STM32L082 and SX1276)☆99Updated last year
- This repo contains all the necessary design and fabrication files for the Penguino SAMR34 RF module and its Feather breakout board.☆60Updated 4 years ago
- SAMD21 Development Board with LoRa and GPS☆36Updated 6 years ago
- Mini Ultra Pro - Arduino Compatible 32-bit ARM Cortex M0+ Board☆19Updated 2 years ago
- Open source I2C based datalogger. The bigger, better cousin to the original serial OpenLog.☆24Updated last year
- Measures the elapsed time during each cycle of up to 8 input frequencies.☆35Updated 3 years ago
- Arduino library and example code for RFToy -- an Arduino-compatible gadget for RF modules. Check http://rftoy.rayshobby.net.☆32Updated 10 years ago
- An Arduino library to enable communications with the Swarm M138 satellite modem☆28Updated 2 years ago
- Lora board with Arduino nano compatibile pinout and simple battery management☆35Updated 6 years ago
- Standalone Ultrasonic Anemometer based on a PIC32☆39Updated 7 years ago
- nordic semiconductor wireless chipsets related code☆43Updated 10 years ago
- Arduino library to support external I2C EEPROMs.☆33Updated 5 years ago
- Arduino shield for various LoRa communication modules☆14Updated 7 years ago
- Arduino compatible single cell ultra low power LoRaWAN node☆21Updated 6 years ago
- A proof-of-concept for running the Codec2 audio codec on an Arduino-compatible Adafruit Feather nRF52 Bluefruit LE board☆31Updated 7 years ago
- Symbols and Footprints for CadSoft Eagle☆29Updated 6 years ago
- http://www.adafruit.com/products/746☆26Updated 3 years ago
- SparkFun Fork of Mike McCauley's RadioHead library (http://www.airspayce.com/mikem/arduino/RadioHead/)☆34Updated last year
- Documentation for Generic Node☆9Updated last year
- A LoRa to BLE relay in 2 versions based on the new SX1262 chipset and an nRF52840. It can run Meshtastic already☆18Updated 4 years ago
- An ESP8266 based Gateway for sending LORA transmissions to the Habitat high altitude balloon tracking system.☆26Updated 6 years ago
- Arduino library for the Adafruit NAU7802 24-bit ADC☆18Updated 3 months ago
- RAK811_BreakBoard for platformio from https://github.com/RAKWireless/RAK811_BreakBoard☆23Updated 5 years ago