Alternatives and similar repositories for E3D:

Users that are interested in E3D are comparing it to the libraries listed below

• bkubicek / QTMarlin
  QT Marlin setting configuration tool
  ☆77Updated 8 years ago
• revarbat / Mandoline
  A lightning-fast program to slice 3D STL files into GCode tool paths for FDM 3D printing. (in Alpha)
  ☆49Updated 10 years ago
• Traumflug / Teacup_Firmware
  Firmware for RepRap and other 3D printers
  ☆313Updated last year
• timschmidt / repsnapper
  RepSnapper RepRap control software
  ☆154Updated 2 years ago
• kliment / Sprinter
  Firmware for RepRap printers and similar devices
  ☆434Updated 11 years ago
• bmander / skeinforge
  Skeinforge converts STL files into gcode files
  ☆36Updated 15 years ago
• ScribbleJ / sjfw
  3D Printer Firmware
  ☆41Updated 13 years ago
• xenovacivus / PathCAM
  PathCAM - Toolpath generation software for CNC robots!
  ☆223Updated 11 months ago
• makerbot / MightyBoardFirmware
  G3 Firmware for the Mighty Board motherboard used in The Replicator.
  ☆74Updated 4 years ago
• area515 / Photonic3D
  Control software for resin 3D printers
  ☆134Updated last year
• bfoz / Ester
  Ester 3D Laser Printer
  ☆39Updated last year
• MaskedRetriever / SuperSkein
  Open Source 3D Mesh Slicer in Processing: Generates gcode from stl files.
  ☆70Updated 13 years ago
• ahmetcemturan / SFACT
  SFACT the New Skeinforge
  ☆151Updated 9 years ago
• cncgoko / Goko
  A desktop application for CNC milling controller running TinyG or Grbl
  ☆72Updated 5 years ago
• GregFrost / PrusaMendel
  My own RepRap Mendel redesign
  ☆41Updated 12 years ago
• robotsinthesun / monkeyprint
  A simple tool for pre-processing 3d models and controlling 3d DLP printers
  ☆60Updated 5 years ago
• zelogik / AluXY
  A ful metal CoreXY system for 3D printer, mill etc..
  ☆47Updated 10 years ago
• amsler / skeinforge
  ☆17Updated 13 years ago
• im-pro-at / cncgcodecontroller
  CNC-GCode-Controller
  ☆146Updated last year
• dewy721 / EMC-2-Arduino
  Arduino + LinuxCNC = Your very own FREE high-end CNC controller.
  ☆117Updated 4 years ago
• ErikZalm / Marlin-non-gen6
  Marlin for non gen6 boards.
  ☆30Updated 13 years ago
• Wallacoloo / printipi
  3d printing directly through the Raspberry Pi's GPIO pins
  ☆142Updated 8 years ago
• Formlabs / hackathon-slicer
  Tiny slicer for DLP-based printers
  ☆162Updated 8 years ago
• mr-MOD / YaSlicer
  Yet another 3D model slicer for DLP/SLA 3D printing machines.
  ☆25Updated 6 years ago
• Heeks / heekscnc
  HeeksCNC is an CAM add-on for HeeksCAD
  ☆98Updated 3 years ago
• Traumflug / Generation_7_Electronics
  This is part of the RepRap project, see http://www.reprap.org. Gen7 is the next generation of electronics meant to drive a RepRap machine…
  ☆131Updated last year
• kory75 / Marlin_360
  Reprap FW with look ahead. SDcard and LCD support. It works on Gen6, Ultimaker, RAMPS and Sanguinololu
  ☆38Updated 7 years ago
• 305engineering / Inkscape
  Extensions for Inkscape
  ☆136Updated 3 years ago
• SourceRabbit / gcode-sender
  Cross platform 3-Axis CNC Machines control software
  ☆79Updated 3 months ago
• jonathanwin / yagv
  A fast 3D Gcode Viewer for Reprap-style 3D printers, in Python and OpenGL
  ☆76Updated 2 years ago