Alternatives and similar repositories for electronics:

Users that are interested in electronics are comparing it to the libraries listed below

• grbl / grbl-builds
  This Grbl repository stores old and current pre-compiled firmwares for users. Please download the firmware directly from the links on our…
  ☆32Updated 8 years ago
• bdring / PSoC_Grbl
  PSoc5 Port of Grbl CNC Controller
  ☆36Updated 7 years ago
• reprap / firmware
  Firmware used to drive RepRaps
  ☆42Updated 13 years ago
• Smoothieware / Smoothie2-old
  (Deprecated attempt at) A Smoothie firmware port to the Smoothieboard v2 boards.
  ☆34Updated 7 years ago
• mariolukas / openexposer
  Open Exposer - Hardware, Slicer, Host, Firmware
  ☆67Updated 8 years ago
• bkubicek / QTMarlin
  QT Marlin setting configuration tool
  ☆77Updated 8 years ago
• briandorey / DIY-Pick-and-Place-Hardware
  CNC and design files for DIY pick and place machines, auto and manual versions
  ☆57Updated 10 years ago
• zelogik / AluXY
  A ful metal CoreXY system for 3D printer, mill etc..
  ☆47Updated 10 years ago
• LaosLaser / Firmware
  Embedded software (firmware) for the laser system and components, including configuration files
  ☆27Updated 11 months ago
• shapeoko / ShapeOko
  Open Hardware desktop CNC machine.
  ☆97Updated 11 years ago
• Traumflug / Generation_7_Electronics
  This is part of the RepRap project, see http://www.reprap.org. Gen7 is the next generation of electronics meant to drive a RepRap machine…
  ☆132Updated last year
• gvJaime / Sunrise
  3D Printable DLP 3D printer
  ☆47Updated 6 years ago
• bobc / bobc_hardware
  Various hardware projects
  ☆86Updated 7 years ago
• villamany / 3dpBurner-sender
  A GCODE sender for the 3dpBurner laser cutter/engraver (GRBL based)
  ☆36Updated 7 years ago
• nickw89509 / LaserInk
  Branch of Grbl 0.9G provides planned spindle control for lasers
  ☆10Updated 8 years ago
• cdsteinkuehler / bobc_hardware
  CRAMPS - A Cape version of the RAMPS-FD design for 3D printing
  ☆45Updated 5 years ago
• esden / pretty-eagle-libs
  Eagle libraries pretty footprints...
  ☆38Updated 10 years ago
• clementleger / Smoothieware-STM32
  [DEPRECATED] Modular, opensource, high performance G-code interpreter and CNC controller written in Object-Oriented C++
  ☆38Updated 9 years ago
• RaD / SolderPaste14M2
  Solder Paste Dispenser
  ☆18Updated 10 years ago
• danithebest91 / ServoStrap
  servo-controlled reprap 3D printer
  ☆98Updated 9 years ago
• bitboxelectronics / R2C2_Firmware
  R2C2 -- electronics for RepRap 3D printers (and others), CNC and other machines.
  ☆35Updated 4 years ago
• IRNAS / UniversalUnipolarStepperController
  Universal controller for Unipolar stepper motors with encoders and end switches
  ☆12Updated 9 years ago
• lhartmann / esp8266_reprap
  ESP8266-based I2S-output WS2812(B) Driver
  ☆51Updated 9 years ago
• ultimachine / RAMBo
  3D Printer electronics
  ☆86Updated 3 years ago
• 3Dartists / AlligatorBoard
  Alligator Board - 3D Printer Controller
  ☆21Updated 9 years ago
• reprappro / melzi
  Melzi Ardentissimo
  ☆53Updated 11 years ago
• SZiv / RAMPSSB
  RAMPS Servo Board. Replaces the X and Y stepper drivers on a RAMPS CNC control board with two channel DC motor quadrature encoder control…
  ☆22Updated 7 years ago
• andysworkshop / awreflow
  Andy's Workshop Reflow Oven Controller
  ☆33Updated 7 years ago
• chamnit / preGrbl
  A g-code preprocessor for grbl. Checks and validates g-code compatibility, converts g-code into a more grbl-friendly format, and provides…
  ☆36Updated 10 years ago
• issus / NEMA8-Juki-Tool-Changer
  Pick and Place tool changer nozzle to hold Juki 500 series nozzles on a NEMA8 hollow shaft motor
  ☆28Updated 8 years ago